P.Audio

P.Audio is well known for producing PA-Chassis for DIY and professional applications.
 

PH220       Best.-Nr.: I-1410386       EUR 38,50 excl. VAT: € 32.35 / $ 28.13
Horn with 1 inch throat diameter and over all dimensions of 220 x 220 mm
  • nominal coverage (HxV): 90 x 75 °
  • cut off frequency: 800 Hz
  • materials: Aluminium

 

PH2370       Best.-Nr.: I-1410388       - not available
Fiberglas Horn with 1 inch throat diameter and over all dimensions (HxW) of 180 x 448 mm
  • nominal coverage (HxV): 90 x 40 °
  • cut off frequency: 500 Hz
  • materials: ABS and Fiber

 

PH2380       Best.-Nr.: I-1410389       EUR 49,00 excl. VAT: € 41.18 / $ 35.81
Fiberglas Horn with 2 inch throat diameter (50,8 mm) and over all dimensions (HxW) of 278 x 443 mm
  • nominal coverage (HxV): 90 x 40 °
  • cut off frequency: 400 Hz
  • materials: ABS and Fiber

 

PH240       Best.-Nr.: I-1410390       - not available
Horn with 1 inch throat diameter and over all dimensions (HxW) of ? x 443 mm
  • nominal coverage (HxV): 90 x 55 °
  • cut off frequency: 780 Hz
  • materials: ABS and Fiber

 

PH2510       Best.-Nr.: I-1410393       - not available
Horn with 1 inch throat diameter and over all dimensions (HxW) of about 110 x 259 mm
  • nominal coverage (HxV): 100 x 80 °
  • cut off frequency: 780 Hz
  • materials: ABS and Fiber

 

PH3220       Best.-Nr.: I-1410397       - not available
Horn with 1 inch throat diameter and over all dimensions (HxW) of about 200 x 319 mm
  • nominal coverage (HxV): 90 x 55 °
  • cut off frequency: 600 Hz
  • materials: ABS and Fiber

 

PH3223       Best.-Nr.: I-1410398       - not available
Horn with 2 inch throat diameter and over all dimensions (HxW) of ? x 323 mm
  • nominal coverage (HxV): 90 x 55 °
  • cut off frequency: 500 Hz
  • materials: ABS and Fiber

 
SN-D345       order no. I-1410560       - not available (_)
25 mm tweeter with high quality cone
  • power handling (continuous/programme) = 40/80 W
  • resonance frequency fs = 750 Hz
  • impedance R = 8 Ohm
  • DC resistance Re = 6,5 Ohm
  • mounting diameter d = 34 mm
  • overall diameter d = 72 mm
  • mounting depth (not countersunk) t = 48 mm

 
SN-D44       order no. I-1410562       - not available (_)
30 mm tweeter with high quality cone
  • power handling (continuous/programme) = 60/120 W
  • resonance frequency fs = 1200 Hz
  • impedance R = 8 Ohm
  • DC resistance Re = 6,5 Ohm
  • overall diameter d = 100 mm
  • mounting depth (not countersunk) t = 43,7 mm

 
PA-D265       order no. I-1410343       - not available (_)
25 mm tweeter with high quality cone
  • power handling (continuous/programme) = 30/60 W
  • resonance frequency fs = 3300 Hz
  • impedance R = 8 Ohm
  • DC resistance Re = 7,6 Ohm
  • mounting diameter d = 34 mm
  • overall diameter d = 80 mm
  • mounting depth (not countersunk) t = 62,3 mm

 
PA-D4155       order no. I-1410351       - not available (_)
30 mm tweeter with high quality cone
  • power handling (continuous/programme) = 20/40 W
  • resonance frequency fs = 1900 Hz
  • impedance R = 8 Ohm
  • DC resistance Re = 6,4 Ohm
  • mounting diameter d = 34,4 mm
  • overall diameter d = 80 mm
  • mounting depth (not countersunk) t = 57,6 mm

 
PA-DE34       order no. I-1410365       - not available (_)
30 mm tweeter with high quality cone
  • power handling (continuous/programme) = 20/30 W
  • resonance frequency fs = 800 Hz
  • impedance R = 8 Ohm
  • DC resistance Re = 6,4 Ohm
  • overall diameter d = 94 mm
  • mounting depth (not countersunk) t = 43 mm

 
PA-DE345       order no. I-1410367       - not available (_)
30 mm tweeter with high quality cone
  • power handling (continuous/programme) = 20/30 W
  • resonance frequency fs = 1700 Hz
  • impedance R = 8 Ohm
  • DC resistance Re = 6,4 Ohm
  • mounting diameter d = 34 mm
  • overall diameter d = 94 mm
  • mounting depth (not countersunk) t = 57 mm

 
BM-D440       order no. I-1410090       - not available (_)
34 mm tweeter with high quality cone
  • power handling (continuous/programme) = 60 W
  • resonance frequency fs = 750 Hz
  • impedance R = 8 Ohm
  • DC resistance Re = 6,5 Ohm
  • overall diameter d = 115 mm
  • mounting depth (not countersunk) t = 53 mm

 
BM-D4405       order no. I-1410092       - not available (_)
34,4 mm tweeter with high quality cone
  • power handling (continuous/programme) = 60 W
  • resonance frequency fs = 750 Hz
  • impedance R = 8 Ohm
  • DC resistance Re = 6,5 Ohm
  • overall diameter d = 115 mm
  • mounting depth (not countersunk) t = 69 mm

 
BM-D450       order no. I-1410094       - not available (_)
30 mm tweeter with high quality cone
  • power handling (continuous/programme) = 80 W
  • resonance frequency fs = 840 Hz
  • impedance R = 8 Ohm
  • DC resistance Re = 6,5 Ohm
  • overall diameter d = 134 mm
  • mounting depth (not countersunk) t = 59 mm

 
BM-D750       order no. I-1410100       - not available (_)
60 mm tweeter with high quality cone
  • power handling (continuous/programme) = 100 W
  • resonance frequency fs = 595 Hz
  • impedance R = 8 Ohm
  • DC resistance Re = 6,5 Ohm
  • overall diameter d = 174 mm
  • mounting depth (not countersunk) t = 71,5 mm

 
PHT405       order no. I-1410419       EUR 23,75 excl. VAT: € 19.96 / $ 17.35
25 mm tweeter with high quality cone
  • power handling (continuous/programme) = 20/40 W
  • resonance frequency fs = 1800 Hz
  • impedance R = 8 Ohm
  • DC resistance Re = 7,2 Ohm
  • overall diameter d = 115 mm
  • mounting depth (not countersunk) t = 115 mm

 
PHT407       order no. I-1410423       - not available
25 mm tweeter with high quality cone
  • power handling (continuous/programme) = 20/40 W
  • resonance frequency fs = 1500 Hz
  • impedance R = 8 Ohm
  • DC resistance Re = 8 Ohm
  • overall diameter d = 106 mm
  • mounting depth (not countersunk) t = 61,5 mm

 
PHT407T       order no. I-1410427       - not available
25 mm tweeter with high quality cone
  • power handling (continuous/programme) = 15/30 W
  • resonance frequency fs = 1500 Hz
  • impedance R = 8 Ohm
  • DC resistance Re = 8 Ohm
  • overall diameter d = 106 mm
  • mounting depth (not countersunk) t = 65,6 mm

 
PHT408       order no. I-1410429       EUR 29,65 excl. VAT: € 24.92 / $ 21.67
25 mm tweeter with high quality cone
  • power handling (continuous/programme) = 30/60 W
  • resonance frequency fs = 1700 Hz
  • impedance R = 8 Ohm
  • DC resistance Re = 7,2 Ohm
  • mounting depth (not countersunk) t = 131 mm

 
PHT409       order no. I-1410431       EUR 20,75 excl. VAT: € 17.44 / $ 15.16
25 mm tweeter with high quality cone
  • power handling (continuous/programme) = 15/30 W
  • resonance frequency fs = 2000 Hz
  • impedance R = 8 Ohm
  • overall diameter d = 148,5 mm
  • mounting depth (not countersunk) t = 61,5 mm

 
PHT411       order no. I-1410436       - not available
25 mm tweeter with high quality cone
  • power handling (continuous/programme) = 30/60 W
  • resonance frequency fs = 1800 Hz
  • impedance R = 8 Ohm
  • mounting depth (not countersunk) t = 131 mm

 
PHT413       order no. I-1410440       EUR 26,65 excl. VAT: € 22.39 / $ 19.47
25 mm tweeter with high quality cone
  • power handling (continuous/programme) = 30/60 W
  • resonance frequency fs = 1800 Hz
  • impedance R = 8 Ohm
  • overall diameter d = 92 mm
  • mounting depth (not countersunk) t = 77 mm

 
PST545       order no. I-1410454       EUR 97,00 excl. VAT: € 81.51 / $ 70.88
30 mm tweeter with high quality cone
  • power handling (continuous/programme) = 75/300 W
  • resonance frequency fs = 3500 Hz
  • impedance R = 8 Ohm
  • DC resistance Re = 6,5 Ohm
  • mounting depth (not countersunk) t = 77 mm

 

recommended cabinet 1:
closed cabinet with 5,6 L volume
from 146/92 Hz (-3dB/-8dB)
 
recommended cabinet 2:
14,1 L volume bass reflex cabinet
with HP100 reflex tube, 23 cm long.
from 86/65 Hz (-3dB/-8dB).

HP10W       order no. I-1410260       - not available (_)
25 cm bass driver with paper cone
  • power handling (continuous/programme) = 100/200 W
  • resonance frequency fs = 48 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 96 dB (2,83V; 1m)
  • DC resistance Re = 6,5 Ohm
  • force factor BL = 12,8 N/A
  • voice coil inductance L = 1,03 mH
  • effective piston radiating area Sd = 300 cm2
  • effective mechanical mass incl. air load 32,01 g
  • equivalent volume of compliance Vas = 55,35 l
  • total Q factor Qts = 0,25 (Qms=5,9, Qes=0,44)
  • maximum peak linear excursion vibration xlin = +/- 3 mm
  • mounting diameter d = 231 mm
  • overall diameter d = 260 mm
  • mounting depth (not countersunk) t = 122,7 mm

 

HP12W       order no. I-1410264       - not available (_)
30 cm bass driver with paper cone
  • power handling (continuous/programme) = 100/200 W
  • resonance frequency fs = 48 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 97 dB (2,83V; 1m)
  • DC resistance Re = 5,5 Ohm
  • force factor BL = 9,93 N/A
  • voice coil inductance L = 0,75 mH
  • effective piston radiating area Sd = 500 cm2
  • effective mechanical mass incl. air load 39,96 g
  • equivalent volume of compliance Vas = 99,77 l
  • total Q factor Qts = 0,52 (Qms=4,99, Qes=0,65)
  • maximum peak linear excursion vibration xlin = +/- 2 mm
  • mounting diameter d = 280 mm
  • overall diameter d = 310 mm
  • mounting depth (not countersunk) t = 139 mm

 

HP15W       order no. I-1410266       - not available (_)
38 cm bass driver with paper cone
  • power handling (continuous/programme) = 200/400 W
  • resonance frequency fs = 34 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 96 dB (2,83V; 1m)
  • DC resistance Re = 6 Ohm
  • force factor BL = 13,66 N/A
  • voice coil inductance L = 0,94 mH
  • effective piston radiating area Sd = 855 cm2
  • effective mechanical mass incl. air load 85,38 g
  • equivalent volume of compliance Vas = 254,26 l
  • total Q factor Qts = 0,52 (Qms=2,74, Qes=0,6)
  • maximum peak linear excursion vibration xlin = +/- 3 mm
  • mounting diameter d = 360 mm
  • overall diameter d = 390 mm
  • mounting depth (not countersunk) t = 152,4 mm

 

recommended cabinet 1:
closed cabinet with 35 L volume
from 88/56 Hz (-3dB/-8dB)
 
recommended cabinet 2:
92 L volume bass reflex cabinet
with 4x HP100 reflex tube, 41 cm long.
from 51/39 Hz (-3dB/-8dB).

HP18W       order no. I-1410268       - not available (_)
44 cm bass driver with paper cone
  • power handling (continuous/programme) = 350/700 W
  • resonance frequency fs = 30 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 98 dB (2,83V; 1m)
  • DC resistance Re = 6 Ohm
  • force factor BL = 23,99 N/A
  • voice coil inductance L = 1,49 mH
  • effective piston radiating area Sd = 1164 cm2
  • effective mechanical mass incl. air load 160,09 g
  • equivalent volume of compliance Vas = 319,63 l
  • total Q factor Qts = 0,27 (Qms=8,19, Qes=0,33)
  • maximum peak linear excursion vibration xlin = +/- 2 mm
  • mounting diameter d = 418,2 mm
  • overall diameter d = 457,4 mm
  • mounting depth (not countersunk) t = 185,3 mm

 

recommended cabinet 1:
closed cabinet with 46 L volume
from 80/50 Hz (-3dB/-8dB)
 
recommended cabinet 2:
126 L volume bass reflex cabinet
with 4x HP100 reflex tube, 36 cm long.
from 45/34 Hz (-3dB/-8dB).

HP21W       order no. I-1410270       - not available (_)
52 cm bass driver with paper cone
  • power handling (continuous/programme) = 850/1700 W
  • resonance frequency fs = 28 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 94 dB (2,83V; 1m)
  • DC resistance Re = 5,8 Ohm
  • force factor BL = 36 N/A
  • voice coil inductance L = 1,58 mH
  • effective piston radiating area Sd = 1660 cm2
  • effective mechanical mass incl. air load 320 g
  • equivalent volume of compliance Vas = 389 l
  • total Q factor Qts = 0,28 (Qms=3,36, Qes=0,46)
  • maximum peak linear excursion vibration xlin = +/- 6,5 mm
  • mounting diameter d = 491 mm
  • overall diameter d = 535 mm
  • mounting depth (not countersunk) t = 215,7 mm

 

C12-300MB       order no. I-1410102       - not available (_)
30 cm bass driver with paper cone
  • power handling (continuous/programme) = 300/600 W
  • resonance frequency fs = 50 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 98 dB (2,83V; 1m)
  • DC resistance Re = 5,4 Ohm
  • force factor BL = 18,12 N/A
  • voice coil inductance L = 1 mH
  • effective piston radiating area Sd = 550 cm2
  • effective mechanical mass incl. air load 53,36 g
  • equivalent volume of compliance Vas = 79,41 l
  • total Q factor Qts = 0,61 (Qms=4,99, Qes=0,27)
  • maximum peak linear excursion vibration xlin = +/- 3,5 mm
  • mounting diameter d = 281,5 mm
  • overall diameter d = 312 mm
  • mounting depth (not countersunk) t = 147,7 mm

 

recommended cabinet 1:
closed cabinet with 6,2 L volume
from 155/98 Hz (-3dB/-8dB)
 
recommended cabinet 2:
14,4 L volume bass reflex cabinet
with 2x HP100 reflex tube, 40 cm long.
from 94/70 Hz (-3dB/-8dB).

C12-500MB       order no. I-1410105       - not available (_)
30 cm bass driver with paper cone
  • power handling (continuous/programme) = 500/1000 W
  • resonance frequency fs = 47 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 96 dB (2,83V; 1m)
  • DC resistance Re = 6 Ohm
  • force factor BL = 21,69 N/A
  • voice coil inductance L = 0,74 mH
  • effective piston radiating area Sd = 550 cm2
  • effective mechanical mass incl. air load 67,49 g
  • equivalent volume of compliance Vas = 72,97 l
  • total Q factor Qts = 0,24 (Qms=4,92, Qes=0,25)
  • maximum peak linear excursion vibration xlin = +/- 4,75 mm
  • mounting diameter d = 282,5 mm
  • overall diameter d = 312 mm
  • mounting depth (not countersunk) t = 124,8 mm

 

recommended cabinet 1:
closed cabinet with 38 L volume
from 95/60 Hz (-3dB/-8dB)
 
recommended cabinet 2:
138 L volume bass reflex cabinet
with 4x HP100 reflex tube, 17 cm long.
from 48/38 Hz (-3dB/-8dB).

C18-650EL       order no. I-1410123       - not available (_)
45 cm bass driver with paper cone
  • power handling (continuous/programme) = 650/1300 W
  • resonance frequency fs = 45 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 98 dB (2,83V; 1m)
  • DC resistance Re = 5,3 Ohm
  • force factor BL = 25,24 N/A
  • voice coil inductance L = 1,64 mH
  • effective piston radiating area Sd = 1250 cm2
  • effective mechanical mass incl. air load 160,76 g
  • equivalent volume of compliance Vas = 158,25 l
  • total Q factor Qts = 0,37 (Qms=9,57, Qes=0,39)
  • maximum peak linear excursion vibration xlin = +/- 5 mm
  • mounting diameter d = 423,8 mm
  • overall diameter d = 475,8 mm
  • mounting depth (not countersunk) t = 190,3 mm

 

recommended cabinet 1:
closed cabinet with 5,7 L volume
from 128/81 Hz (-3dB/-8dB)
 
recommended cabinet 2:
17 L volume bass reflex cabinet
with 2x HP100 reflex tube, 52 cm long.
from 71/54 Hz (-3dB/-8dB).

SD12       order no. I-1410521       - not available (_)
30 cm bass driver with paper cone
  • power handling (continuous/programme) = 500/1000 W
  • resonance frequency fs = 48 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 94 dB (2,83V; 1m)
  • DC resistance Re = 4,9 Ohm
  • force factor BL = 19,82 N/A
  • voice coil inductance L = 1,64 mH
  • effective piston radiating area Sd = 530 cm2
  • effective mechanical mass incl. air load 103,9 g
  • equivalent volume of compliance Vas = 41,4 l
  • total Q factor Qts = 0,3 (Qms=6,45, Qes=0,31)
  • maximum peak linear excursion vibration xlin = +/- 5 mm
  • mounting diameter d = 283,1 mm
  • overall diameter d = 321 mm
  • mounting depth (not countersunk) t = 173,3 mm

 

recommended cabinet 1:
closed cabinet with 12,2 L volume
from 125/79 Hz (-3dB/-8dB)
 
recommended cabinet 2:
31 L volume bass reflex cabinet
with 2x HP100 reflex tube, 25 cm long.
from 73/55 Hz (-3dB/-8dB).

SD15       order no. I-1410523       - not available (_)
37 cm bass driver with paper cone
  • power handling (continuous/programme) = 600/1200 W
  • resonance frequency fs = 41 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 97 dB (2,83V; 1m)
  • DC resistance Re = 5,1 Ohm
  • force factor BL = 24,7 N/A
  • voice coil inductance L = 1,95 mH
  • effective piston radiating area Sd = 850 cm2
  • effective mechanical mass incl. air load 128 g
  • equivalent volume of compliance Vas = 121,7 l
  • total Q factor Qts = 0,26 (Qms=7,33, Qes=0,27)
  • maximum peak linear excursion vibration xlin = +/- 5 mm
  • mounting diameter d = 351,7 mm
  • overall diameter d = 390 mm
  • mounting depth (not countersunk) t = 202,3 mm

 

recommended cabinet 1:
closed cabinet with 27 L volume
from 101/64 Hz (-3dB/-8dB)
 
recommended cabinet 2:
68 L volume bass reflex cabinet
with 4x HP100 reflex tube, 43 cm long.
from 59/45 Hz (-3dB/-8dB).

SD18       order no. I-1410525       - not available (_)
45 cm bass driver with paper cone
  • power handling (continuous/programme) = 800/1600 W
  • resonance frequency fs = 33,2 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 98 dB (2,83V; 1m)
  • DC resistance Re = 5,1 Ohm
  • force factor BL = 35,8 N/A
  • voice coil inductance L = 1,95 mH
  • effective piston radiating area Sd = 1250 cm2
  • effective mechanical mass incl. air load 192,1 g
  • equivalent volume of compliance Vas = 264,3 l
  • total Q factor Qts = 0,26 (Qms=7,11, Qes=0,27)
  • maximum peak linear excursion vibration xlin = +/- 5 mm
  • mounting diameter d = 423,8 mm
  • overall diameter d = 476 mm
  • mounting depth (not countersunk) t = 226,3 mm

 

recommended cabinet 1:
closed cabinet with 24 L volume
from 119/75 Hz (-3dB/-8dB)
 
recommended cabinet 2:
53 L volume bass reflex cabinet
with 4x HP100 reflex tube, 39 cm long.
from 74/55 Hz (-3dB/-8dB).

SD21       order no. I-1410527       - not available (_)
52 cm bass driver with paper cone
  • power handling (continuous/programme) = 1000/2000 W
  • resonance frequency fs = 34,8 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 99 dB (2,83V; 1m)
  • DC resistance Re = 5,3 Ohm
  • force factor BL = 35,8 N/A
  • voice coil inductance L = 2,06 mH
  • effective piston radiating area Sd = 1660 cm2
  • effective mechanical mass incl. air load 267,9 g
  • equivalent volume of compliance Vas = 305,4 l
  • total Q factor Qts = 0,23 (Qms=5,07, Qes=0,24)
  • maximum peak linear excursion vibration xlin = +/- 5 mm
  • mounting diameter d = 488,2 mm
  • overall diameter d = 545 mm
  • mounting depth (not countersunk) t = 247,5 mm

 

recommended cabinet 1:
closed cabinet with 2,1 L volume
from 251/158 Hz (-3dB/-8dB)
 
recommended cabinet 2:
4,6 L volume bass reflex cabinet
with HP100 reflex tube, 25 cm long.
from 155/116 Hz (-3dB/-8dB).

P10-100MB       order no. I-1410297       - not available (_)
25 cm midrange driver with paper cone
  • power handling (continuous/programme) = 300/600 W
  • resonance frequency fs = 73 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 100 dB (2,83V; 1m)
  • DC resistance Re = 6,5 Ohm
  • force factor BL = 20,9 N/A
  • voice coil inductance L = 0,55 mH
  • effective piston radiating area Sd = 340 cm2
  • effective mechanical mass incl. air load 35,72 g
  • equivalent volume of compliance Vas = 26,7 l
  • total Q factor Qts = 0,23 (Qms=3,63, Qes=0,25)
  • maximum peak linear excursion vibration xlin = +/- 0,5 mm
  • mounting diameter d = 237 mm
  • overall diameter d = 269 mm
  • mounting depth (not countersunk) t = 118 mm

 

recommended cabinet 1:
closed cabinet with 6,6 L volume
from 141/89 Hz (-3dB/-8dB)
 
recommended cabinet 2:
17 L volume bass reflex cabinet
with 2x HP100 reflex tube, 39 cm long.
from 82/62 Hz (-3dB/-8dB).

P120-130LF       order no. I-1410304       - not available (_)
30 cm bass driver with paper cone
  • power handling (continuous/programme) = 400/800 W
  • resonance frequency fs = 48 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 97 dB (2,83V; 1m)
  • DC resistance Re = 5,3 Ohm
  • force factor BL = 20,1 N/A
  • voice coil inductance L = 1,44 mH
  • effective piston radiating area Sd = 530 cm2
  • effective mechanical mass incl. air load 71,44 g
  • equivalent volume of compliance Vas = 60,27 l
  • total Q factor Qts = 0,27 (Qms=5,07, Qes=0,28)
  • maximum peak linear excursion vibration xlin = +/- 5,5 mm
  • mounting diameter d = 285 mm
  • overall diameter d = 318 mm
  • mounting depth (not countersunk) t = 124 mm

 

recommended cabinet 1:
closed cabinet with 35 L volume
from 89/56 Hz (-3dB/-8dB)
 
recommended cabinet 2:
124 L volume bass reflex cabinet
with 2x HP100 reflex tube, 7 cm long.
from 45/36 Hz (-3dB/-8dB).

P150-2226       order no. I-1410306       - not available (_)
37 cm bass driver with paper cone
  • power handling (continuous/programme) = 600/1200 W
  • resonance frequency fs = 41 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 97 dB (2,83V; 1m)
  • DC resistance Re = 5,1 Ohm
  • force factor BL = 19,1 N/A
  • voice coil inductance L = 1,46 mH
  • effective piston radiating area Sd = 880 cm2
  • effective mechanical mass incl. air load 107 g
  • equivalent volume of compliance Vas = 155 l
  • total Q factor Qts = 0,37 (Qms=5,9, Qes=0,39)
  • maximum peak linear excursion vibration xlin = +/- 5,5 mm
  • mounting diameter d = 348 mm
  • overall diameter d = 386 mm
  • mounting depth (not countersunk) t = 174 mm

 

recommended cabinet 1:
closed cabinet with 43 L volume
from 88/55 Hz (-3dB/-8dB)
 
recommended cabinet 2:
125 L volume bass reflex cabinet
with 4x HP100 reflex tube, 27 cm long.
from 49/37 Hz (-3dB/-8dB).

P180-2241       order no. I-1410309       - not available (_)
45 cm bass driver with paper cone
  • power handling (continuous/programme) = 600/1200 W
  • resonance frequency fs = 33 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 98 dB (2,83V; 1m)
  • DC resistance Re = 5,1 Ohm
  • force factor BL = 23,6 N/A
  • voice coil inductance L = 1,5 mH
  • effective piston radiating area Sd = 1240 cm2
  • effective mechanical mass incl. air load 160 g
  • equivalent volume of compliance Vas = 310 l
  • total Q factor Qts = 0,3 (Qms=7,11, Qes=0,31)
  • maximum peak linear excursion vibration xlin = +/- 5,5 mm
  • mounting diameter d = 424 mm
  • overall diameter d = 476 mm
  • mounting depth (not countersunk) t = 198 mm

 

recommended cabinet 1:
closed cabinet with 8,5 L volume
from 128/81 Hz (-3dB/-8dB)
 
recommended cabinet 2:
21 L volume bass reflex cabinet
with HP100 reflex tube, 19 cm long.
from 75/57 Hz (-3dB/-8dB).

BM10CXA       order no. I-1410044       - not available (_)
25 cm coax driver with paper cone
  • power handling (continuous/programme) = 300/600 W
  • resonance frequency fs = 42 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 96 dB (2,83V; 1m)
  • DC resistance Re = 5,8 Ohm
  • force factor BL = 12,25 N/A
  • voice coil inductance L = 0,75 mH
  • effective piston radiating area Sd = 340 cm2
  • effective mechanical mass incl. air load 26,79 g
  • equivalent volume of compliance Vas = 84,12 l
  • total Q factor Qts = 0,26 (Qms=4,74, Qes=0,27)
  • maximum peak linear excursion vibration xlin = +/- 3 mm
  • mounting diameter d = 244 mm
  • overall diameter d = 264 mm
  • mounting depth (not countersunk) t = 169 mm

 

recommended cabinet 1:
closed cabinet with 5,6 L volume
from 165/104 Hz (-3dB/-8dB)
 
recommended cabinet 2:
12,6 L volume bass reflex cabinet
with 2x HP100 reflex tube, 41 cm long.
from 102/76 Hz (-3dB/-8dB).

BM12CX38       order no. I-1410046       - not available (_)
30 cm coax driver with paper cone
  • power handling (continuous/programme) = 600/1200 W
  • resonance frequency fs = 48 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 98 dB (2,83V; 1m)
  • DC resistance Re = 5,2 Ohm
  • force factor BL = 17 N/A
  • voice coil inductance L = 0,55 mH
  • effective piston radiating area Sd = 510 cm2
  • effective mechanical mass incl. air load 54,67 g
  • equivalent volume of compliance Vas = 72,94 l
  • total Q factor Qts = 0,22 (Qms=5,99, Qes=0,23)
  • maximum peak linear excursion vibration xlin = +/- 4,5 mm
  • mounting diameter d = 287,5 mm
  • overall diameter d = 319,5 mm
  • mounting depth (not countersunk) t = 195,4 mm

 

recommended cabinet 1:
closed cabinet with 14,5 L volume
from 100/63 Hz (-3dB/-8dB)
 
recommended cabinet 2:
44 L volume bass reflex cabinet
with 2x HP100 reflex tube, 28 cm long.
from 55/42 Hz (-3dB/-8dB).

BM15CX38       order no. I-1410062       - not available (_)
36 cm coax driver with paper cone
  • power handling (continuous/programme) = 700/1400 W
  • resonance frequency fs = 39 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 94 dB (2,83V; 1m)
  • DC resistance Re = 6,5 Ohm
  • force factor BL = 17,83 N/A
  • voice coil inductance L = 1,13 mH
  • effective piston radiating area Sd = 530 cm2
  • effective mechanical mass incl. air load 64,99 g
  • equivalent volume of compliance Vas = 97,92 l
  • total Q factor Qts = 0,3 (Qms=3,99, Qes=0,33)
  • maximum peak linear excursion vibration xlin = +/- 4,5 mm
  • mounting diameter d = 346 mm
  • overall diameter d = 380 mm
  • mounting depth (not countersunk) t = 221 mm

 

recommended cabinet 1:
closed cabinet with 4,5 L volume
from 76/48 Hz (-3dB/-8dB)
 
recommended cabinet 2:
18 L volume bass reflex cabinet
with HP100 reflex tube, 75 cm long.
from 35/30 Hz (-3dB/-8dB).

TM8       order no. I-1410576       - not available (_)
20 cm bass driver with paper cone
  • power handling (continuous/programme) = 250/500 W
  • resonance frequency fs = 47 Hz
  • impedance R = 4 Ohm
  • sound pressure level SPL = 85 dB (2,83V; 1m)
  • DC resistance Re = 3,4 Ohm
  • force factor BL = 11,96 N/A
  • voice coil inductance L = 1,14 mH
  • effective piston radiating area Sd = 201 cm2
  • effective mechanical mass incl. air load 75,77 g
  • equivalent volume of compliance Vas = 8,6 l
  • total Q factor Qts = 0,48 (Qms=5,15, Qes=0,53)
  • maximum peak linear excursion vibration xlin = +/- 8 mm
  • mounting diameter d = 186 mm
  • overall diameter d = 218 mm
  • mounting depth (not countersunk) t = 176,2 mm

 

TM10       order no. I-1410572       - not available (_)
26 cm bass driver with paper cone
  • power handling (continuous/programme) = 400/800 W
  • resonance frequency fs = 55 Hz
  • impedance R = 4 Ohm
  • sound pressure level SPL = 89 dB (2,83V; 1m)
  • DC resistance Re = 3,6 Ohm
  • force factor BL = 16,91 N/A
  • voice coil inductance L = 1 mH
  • effective piston radiating area Sd = 340 cm2
  • effective mechanical mass incl. air load 140,92 g
  • equivalent volume of compliance Vas = 9,94 l
  • total Q factor Qts = 0,57 (Qms=9,26, Qes=0,61)
  • maximum peak linear excursion vibration xlin = +/- 10 mm
  • mounting diameter d = 234,9 mm
  • overall diameter d = 273 mm
  • mounting depth (not countersunk) t = 212 mm

 

Home  
 
© Copyright 2005 Iris Strassacker; All rights reserved. - errors and omissions excepted