Mundorf is regarded as specialist in high-end components.
We have, therefore, listed the most interesting ones below. All listed coils
are made of copper lacquer wire with a purity of > 99.99%. The wire ends are tinned and
labelled. Inductance is measured at 25 degrees Celsius; tolerance is +/- 3%.
L denotes inductance, R the DC resistance, D the diameter, Le the length,
W the width, H the height.
The high-performance HP 3616 ferrite is the answer for many users need for an inexpensive
high-power ferrite material. The mechanical advantages of these relatively small coils are
obvious, but it wasn‘t until this new HP 3616 material became available that Mundorf could even
consider adding a ferrite core to their product line. This quality material, manufactured in Germany,
distinguishes itself from the widely used cheaper cores from the Far East in its high loading capacity.
The H-series combines excellent electrical and mechanical specifications with relatively low
Baked varnish coils of this type can be found at the end of this page. Their product ID starts with "B"
Please note: The power values Pmax in the following tables were determined at 20 degrees Celsius ambient temperature and free convection. They are just a guideline and - since we are not the manufacturers - cannot be guaranteed by us.