open a bigger photo

NE19VTS-04       order no. ty-NE19VTS-04       EUR 39,00 excl. VAT: € 32.77 / $ 37.03
19 mm tweeter with fabric cone. The magnet system is based on Neodymium technology.

• power handling (continuous/programme) = 80 W
• frequency range = 1500-30000 Hz
• resonance frequency fs = 743 Hz
• impedance R = 4 Ohm
• sound pressure level SPL = 88,3 dB (2,83V; 1m)
• DC resistance Re = 2,71 Ohm
• force factor BL = 1,07 N/A
• voice coil inductance L = 0,01 mH
• effective piston radiating area Sd = 4,9 cm²
• effective mechanical mass incl. air load mms = 0,2 g
• total Q factor Qts = 1,35 (Qms=3,36, Qes=2,27)
• voice coil diameter = 19 mm
• maximum peak linear excursion vibration x_lin = +/- 0,1 mm
• overall diameter d = 52 mm
• mounting depth (not countersunk) t = 25,1 mm
• mass m = 0,06 kg

PDF data sheet

open a bigger photo

XT19TD00-04       order no. ty-XT19TD00-04       EUR 43,00 excl. VAT: € 36.13 / $ 40.83
19 mm tweeter with fabric cone.

• power handling (continuous/programme) = 120 W
• frequency range = 2000-40000 Hz
• resonance frequency fs = 763 Hz
• impedance R = 4 Ohm
• sound pressure level SPL = 89,1 dB (2,83V; 1m)
• DC resistance Re = 2,86 Ohm
• force factor BL = 1,85 N/A
• voice coil inductance L = 0,01 mH
• effective piston radiating area Sd = 4,9 cm²
• effective mechanical mass incl. air load mms = 0,2 g
• total Q factor Qts = 0,65 (Qms=3,05, Qes=0,83)
• voice coil diameter = 19 mm
• maximum peak linear excursion vibration x_lin = +/- 0,1 mm
• mounting diameter d = 67 mm
• overall diameter d = 94 mm
• mounting depth (not countersunk) t = 35,7 mm
• mass m = 0,32 kg

PDF data sheet

open a bigger photo

XT19NC30-04       order no. ty-XT19NC30-04       EUR 29,00 excl. VAT: € 24.37 / $ 27.54
19 mm tweeter with fabric cone.

• power handling (continuous/programme) = 80 W
• frequency range = 2500-40000 Hz
• resonance frequency fs = 973 Hz
• impedance R = 4 Ohm
• sound pressure level SPL = 89,4 dB (2,83V; 1m)
• DC resistance Re = 3,06 Ohm
• force factor BL = 1,63 N/A
• voice coil inductance L = 0,01 mH
• effective piston radiating area Sd = 4,5 cm²
• effective mechanical mass incl. air load mms = 0,2 g
• total Q factor Qts = 1,21 (Qms=7,72, Qes=1,44)
• voice coil diameter = 19 mm
• maximum peak linear excursion vibration x_lin = +/- 0,1 mm
• mounting diameter d = 38,6 mm
• overall diameter d = 66,3 mm
• mounting depth (not countersunk) t = 25,7 mm
• mass m = 0,05 kg

PDF data sheet

open a bigger photo

DX20BF00-08       order no. ty-DX20BF00-08       - not available
19 mm tweeter with fabric cone. Voice coil windings immersed in magnetic fluid increase short term power handling capacity.

• power handling (continuous/programme) = 60 W
• frequency range = 2000-25000 Hz
• resonance frequency fs = 810 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 86,1 dB (2,83V; 1m)
• DC resistance Re = 7,52 Ohm
• force factor BL = 1,06 N/A
• voice coil inductance L = 0,02 mH
• effective piston radiating area Sd = 4,9 cm²
• effective mechanical mass incl. air load mms = 0,1 g
• total Q factor Qts = 1,71 (Qms=2,86, Qes=4,23)
• voice coil diameter = 19 mm
• maximum peak linear excursion vibration x_lin = +/- 0,1 mm
• mounting diameter d = 49,5 mm
• overall diameter d = 66 mm
• mounting depth (not countersunk) t = 35 mm
• mass m = 0,17 kg

PDF data sheet

open a bigger photo

DX20BF00-04       order no. ty-DX20BF00-04       EUR 29,00 excl. VAT: € 24.37 / $ 27.54
19 mm tweeter with fabric cone. Voice coil windings immersed in magnetic fluid increase short term power handling capacity.

• power handling (continuous/programme) = 60 W
• frequency range = 2000-25000 Hz
• resonance frequency fs = 822 Hz
• impedance R = 4 Ohm
• sound pressure level SPL = 90,1 dB (2,83V; 1m)
• DC resistance Re = 2,81 Ohm
• force factor BL = 1 N/A
• voice coil inductance L = 0,01 mH
• effective piston radiating area Sd = 4,9 cm²
• effective mechanical mass incl. air load mms = 0,2 g
• total Q factor Qts = 1,27 (Qms=2,24, Qes=2,93)
• voice coil diameter = 19 mm
• maximum peak linear excursion vibration x_lin = +/- 0,1 mm
• mounting diameter d = 49,5 mm
• overall diameter d = 66 mm
• mounting depth (not countersunk) t = 35 mm
• mass m = 0,17 kg

PDF data sheet

open a bigger photo

OX20SC00-04       order no. ty-OX20SC00-04       EUR 29,00 excl. VAT: € 24.37 / $ 27.54
19 mm tweeter with fabric cone.

• power handling (continuous/programme) = 80 W
• frequency range = 2500-35000 Hz
• resonance frequency fs = 1025 Hz
• impedance R = 4 Ohm
• sound pressure level SPL = 90,7 dB (2,83V; 1m)
• DC resistance Re = 3,28 Ohm
• force factor BL = 1,54 N/A
• voice coil inductance L = 0,01 mH
• effective piston radiating area Sd = 4,9 cm²
• effective mechanical mass incl. air load mms = 0,2 g
• total Q factor Qts = 1,53 (Qms=9,46, Qes=1,83)
• voice coil diameter = 19 mm
• maximum peak linear excursion vibration x_lin = +/- 0,1 mm
• overall diameter d = 33,4 mm
• mass m = 0,04 kg

PDF data sheet

open a bigger photo

BC25TG15-04       order no. ty-BC25TG15-04       EUR 21,00 excl. VAT: € 17.65 / $ 19.94
25 mm tweeter with fabric cone. Voice coil windings immersed in magnetic fluid increase short term power handling capacity.

• power handling (continuous/programme) = 50 W
• frequency range = 2000-22000 Hz
• resonance frequency fs = 1128 Hz
• impedance R = 4 Ohm
• sound pressure level SPL = 93,2 dB (2,83V; 1m)
• DC resistance Re = 2,99 Ohm
• force factor BL = 2,28 N/A
• voice coil inductance L = 0,02 mH
• effective piston radiating area Sd = 6,2 cm²
• effective mechanical mass incl. air load mms = 0,3 g
• total Q factor Qts = 0,84 (Qms=2,54, Qes=1,26)
• voice coil diameter = 25 mm
• maximum peak linear excursion vibration x_lin = +/- 0,6 mm
• mounting diameter d = 70 mm
• overall diameter d = 104 mm
• mounting depth (not countersunk) t = 32,55 mm
• mass m = 0,5 kg

PDF data sheet

open a bigger photo

BC25SC06-04       order no. ty-BC25SC06-04       EUR 23,00 excl. VAT: € 19.33 / $ 21.84
25 mm tweeter with fabric cone. Voice coil windings immersed in magnetic fluid increase short term power handling capacity.

• power handling (continuous/programme) = 25 W
• frequency range = 2500-20000 Hz
• resonance frequency fs = 1395 Hz
• impedance R = 4 Ohm
• sound pressure level SPL = 96,2 dB (2,83V; 1m)
• DC resistance Re = 2,76 Ohm
• force factor BL = 2,05 N/A
• voice coil inductance L = 0,02 mH
• effective piston radiating area Sd = 4,9 cm²
• effective mechanical mass incl. air load mms = 0,3 g
• total Q factor Qts = 1,17 (Qms=3,45, Qes=1,76)
• voice coil diameter = 25 mm
• mounting diameter d = 46,2 mm
• overall diameter d = 70 mm
• mounting depth (not countersunk) t = 34,5 mm
• mass m = 0,08 kg

PDF data sheet

open a bigger photo

BC25SC55-04       order no. ty-BC25SC55-04       EUR 23,00 excl. VAT: € 19.33 / $ 21.84
25 mm tweeter with fabric cone. Voice coil windings immersed in magnetic fluid increase short term power handling capacity.

• power handling (continuous/programme) = 100 W
• frequency range = 2500-20000 Hz
• resonance frequency fs = 1400 Hz
• impedance R = 4 Ohm
• sound pressure level SPL = 93,3 dB (2,83V; 1m)
• DC resistance Re = 2,74 Ohm
• force factor BL = 2,18 N/A
• voice coil inductance L = 0,02 mH
• effective piston radiating area Sd = 7,1 cm²
• effective mechanical mass incl. air load mms = 0,4 g
• total Q factor Qts = 1,24 (Qms=3,82, Qes=1,83)
• voice coil diameter = 25 mm
• overall diameter d = 70x54 mm
• mounting depth (not countersunk) t = 29,55 mm
• mass m = 0,08 kg

PDF data sheet

open a bigger photo

OC25SC65-04       order no. ty-OC25SC65-04       EUR 25,00 excl. VAT: € 21.01 / $ 23.74
25 mm tweeter with fabric cone. Voice coil windings immersed in magnetic fluid increase short term power handling capacity.

• power handling (continuous/programme) = 25 W
• frequency range = 2500-20000 Hz
• resonance frequency fs = 1382 Hz
• impedance R = 4 Ohm
• sound pressure level SPL = 93,2 dB (2,83V; 1m)
• DC resistance Re = 3 Ohm
• force factor BL = 2,1 N/A
• voice coil inductance L = 0,02 mH
• effective piston radiating area Sd = 6,9 cm²
• effective mechanical mass incl. air load mms = 0,3 g
• total Q factor Qts = 1,26 (Qms=4,07, Qes=1,83)
• voice coil diameter = 25 mm
• overall diameter d = 41,26 mm
• mass m = 0,05 kg

PDF data sheet

open a bigger photo

NE25VTS-04       order no. ty-NE25VTS-04       EUR 44,00 excl. VAT: € 36.97 / $ 41.78
25 mm tweeter with fabric cone. The magnet system is based on Neodymium technology.

• power handling (continuous/programme) = 100 W
• frequency range = 1000-25000 Hz
• resonance frequency fs = 733 Hz
• impedance R = 4 Ohm
• sound pressure level SPL = 91,3 dB (2,83V; 1m)
• DC resistance Re = 3,15 Ohm
• force factor BL = 2,17 N/A
• voice coil inductance L = 0,01 mH
• effective piston radiating area Sd = 8 cm²
• effective mechanical mass incl. air load mms = 0,4 g
• total Q factor Qts = 0,89 (Qms=4,41, Qes=1,12)
• voice coil diameter = 25 mm
• maximum peak linear excursion vibration x_lin = +/- 0,1 mm
• mounting diameter d = 48 mm
• overall diameter d = 66,3 mm
• mounting depth (not countersunk) t = 31,04 mm
• mass m = 0,1 kg

PDF data sheet

NE25VTC-04       order no. ty-NE25VTC-04       EUR 49,00 excl. VAT: € 41.18 / $ 46.53
25 mm tweeter with ceramic cone. The magnet system is based on Neodymium technology.

• power handling (continuous/programme) = 100 W
• frequency range = 1000-25000 Hz
• resonance frequency fs = 730 Hz
• impedance R = 4 Ohm
• sound pressure level SPL = 90 dB (2,83V; 1m)
• DC resistance Re = 3,2 Ohm
• force factor BL = 2,1 N/A
• voice coil inductance L = 0,01 mH
• effective piston radiating area Sd = 8 cm²
• effective mechanical mass incl. air load mms = 0,36 g
• total Q factor Qts = 0,95 (Qms=4,6, Qes=1,2)
• voice coil diameter = 25 mm
• maximum peak linear excursion vibration x_lin = +/- 0,1 mm
• mounting diameter d = 48 mm
• overall diameter d = 66,3 mm
• mounting depth (not countersunk) t = 31,5 mm
• mass m = 0,1 kg

open a bigger photo

XT25SC90-04       order no. ty-XT25SC90-04       EUR 47,00 excl. VAT: € 39.50 / $ 44.63
25 mm tweeter with fabric cone.

• power handling (continuous/programme) = 100 W
• frequency range = 2000-30000 Hz
• resonance frequency fs = 825 Hz
• impedance R = 4 Ohm
• sound pressure level SPL = 90,1 dB (2,83V; 1m)
• DC resistance Re = 3,13 Ohm
• force factor BL = 2,18 N/A
• voice coil inductance L = 0,01 mH
• effective piston radiating area Sd = 8,6 cm²
• effective mechanical mass incl. air load mms = 0,3 g
• total Q factor Qts = 0,93 (Qms=7,17, Qes=1,07)
• voice coil diameter = 25 mm
• maximum peak linear excursion vibration x_lin = +/- 0,1 mm
• mounting diameter d = 46,5 mm
• overall diameter d = 65 mm
• mass m = 0,07 kg

PDF data sheet

open a bigger photo

XT25TG30-04       order no. ty-XT25TG30-04       EUR 45,00 excl. VAT: € 37.82 / $ 42.73
25 mm tweeter with fabric cone.

• power handling (continuous/programme) = 110 W
• frequency range = 2000-40000 Hz
• resonance frequency fs = 436 Hz
• impedance R = 4 Ohm
• sound pressure level SPL = 90,8 dB (2,83V; 1m)
• DC resistance Re = 3 Ohm
• force factor BL = 2,36 N/A
• voice coil inductance L = 0,01 mH
• effective piston radiating area Sd = 8,2 cm²
• effective mechanical mass incl. air load mms = 0,4 g
• total Q factor Qts = 0,44 (Qms=2,5, Qes=0,54)
• voice coil diameter = 25 mm
• maximum peak linear excursion vibration x_lin = +/- 0,5 mm
• mounting diameter d = 72 mm
• overall diameter d = 104 mm
• mounting depth (not countersunk) t = 40,1 mm
• mass m = 0,5 kg

PDF data sheet

open a bigger photo

XT25SC30-04       order no. ty-XT25SC30-04       - not available
25 mm tweeter with fabric cone.

• power handling (continuous/programme) = 100 W
• frequency range = 1500-40000 Hz
• resonance frequency fs = 649 Hz
• impedance R = 4 Ohm
• sound pressure level SPL = 90,4 dB (2,83V; 1m)
• DC resistance Re = 2,75 Ohm
• force factor BL = 2,27 N/A
• voice coil inductance L = 0,01 mH
• effective piston radiating area Sd = 8,2 cm²
• effective mechanical mass incl. air load mms = 0,4 g
• total Q factor Qts = 0,61 (Qms=2,65, Qes=0,79)
• voice coil diameter = 25 mm
• maximum peak linear excursion vibration x_lin = +/- 0,1 mm
• mounting diameter d = 83 mm
• overall diameter d = 104,3 mm
• mounting depth (not countersunk) t = 45,81 mm
• mass m = 0,42 kg

PDF data sheet

open a bigger photo

DX25TG59-04       order no. ty-DX25TG59-04       EUR 29,00 excl. VAT: € 24.37 / $ 27.54
25 mm tweeter with fabric cone. Voice coil windings immersed in magnetic fluid increase short term power handling capacity.

• power handling (continuous/programme) = 100 W
• frequency range = 2000-23000 Hz
• resonance frequency fs = 640 Hz
• impedance R = 4 Ohm
• sound pressure level SPL = 93 dB (2,83V; 1m)
• DC resistance Re = 2,93 Ohm
• force factor BL = 2,41 N/A
• voice coil inductance L = 0,02 mH
• effective piston radiating area Sd = 8,2 cm²
• effective mechanical mass incl. air load mms = 0,4 g
• total Q factor Qts = 0,57 (Qms=2,46, Qes=0,74)
• voice coil diameter = 25 mm
• maximum peak linear excursion vibration x_lin = +/- 0,1 mm
• mounting diameter d = 72 mm
• overall diameter d = 104 mm
• mounting depth (not countersunk) t = 33 mm
• mass m = 0,5 kg

PDF data sheet

open a bigger photo

DX25BG60-04       order no. ty-DX25BG60-04       EUR 58,00 excl. VAT: € 48.74 / $ 55.08
25 mm tweeter with fabric cone.

• power handling (continuous/programme) = 80 W
• frequency range = 1500-30000 Hz
• resonance frequency fs = 415 Hz
• impedance R = 4 Ohm
• sound pressure level SPL = 94 dB (2,83V; 1m)
• DC resistance Re = 3,47 Ohm
• force factor BL = 2,46 N/A
• voice coil inductance L = 0,01 mH
• effective piston radiating area Sd = 8 cm²
• effective mechanical mass incl. air load mms = 0,3 g
• total Q factor Qts = 0,36 (Qms=1,4, Qes=0,48)
• voice coil diameter = 25 mm
• maximum peak linear excursion vibration x_lin = +/- 0,1 mm
• mounting diameter d = 72 mm
• overall diameter d = 104 mm
• mounting depth (not countersunk) t = 61 mm
• mass m = 0,8 kg

PDF data sheet

open a bigger photo

DA25BG08-04       order no. ty-DA25BG08-04       on request
25 mm tweeter with aluminium cone. Voice coil windings immersed in magnetic fluid increase short term power handling capacity.

• power handling (continuous/programme) = 100 W
• frequency range = 1500-30000 Hz
• resonance frequency fs = 770 Hz
• impedance R = 4 Ohm
• sound pressure level SPL = 94,7 dB (2,83V; 1m)
• DC resistance Re = 3,1 Ohm
• force factor BL = 2,38 N/A
• voice coil inductance L = 0,01 mH
• effective piston radiating area Sd = 6,7 cm²
• effective mechanical mass incl. air load mms = 0,3 g
• total Q factor Qts = 0,57 (Qms=1,88, Qes=0,82)
• voice coil diameter = 25 mm
• maximum peak linear excursion vibration x_lin = +/- 0,7 mm
• mounting diameter d = 72 mm
• overall diameter d = 104,3 mm
• mounting depth (not countersunk) t = 44 mm
• mass m = 0,68 kg

PDF data sheet

open a bigger photo

DA25BG08-08       order no. ty-DA25BG08-08       EUR 49,00 excl. VAT: € 41.18 / $ 46.53
25 mm tweeter with aluminium cone. Voice coil windings immersed in magnetic fluid increase short term power handling capacity.

• power handling (continuous/programme) = 100 W
• frequency range = 1500-30000 Hz
• resonance frequency fs = 795 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 91,9 dB (2,83V; 1m)
• DC resistance Re = 6,72 Ohm
• force factor BL = 3,1 N/A
• voice coil inductance L = 0,01 mH
• effective piston radiating area Sd = 6,7 cm²
• effective mechanical mass incl. air load mms = 0,3 g
• total Q factor Qts = 0,69 (Qms=1,89, Qes=1,09)
• voice coil diameter = 25 mm
• maximum peak linear excursion vibration x_lin = +/- 0,7 mm
• mounting diameter d = 72 mm
• overall diameter d = 104,3 mm
• mounting depth (not countersunk) t = 44 mm
• mass m = 0,68 kg

PDF data sheet

open a bigger photo

D26NC56-06       order no. ty-D26NC56-06       - not available
25 mm tweeter with fabric cone. Voice coil windings immersed in magnetic fluid increase short term power handling capacity.

• power handling (continuous/programme) = 100 W
• frequency range = 3000-25000 Hz
• resonance frequency fs = 1625 Hz
• impedance R = 6 Ohm
• sound pressure level SPL = 90,7 dB (2,83V; 1m)
• DC resistance Re = 4,68 Ohm
• force factor BL = 2,19 N/A
• voice coil inductance L = 0,02 mH
• effective piston radiating area Sd = 7,1 cm²
• effective mechanical mass incl. air load mms = 0,4 g
• total Q factor Qts = 0,97 (Qms=1,33, Qes=3,59)
• voice coil diameter = 25 mm
• maximum peak linear excursion vibration x_lin = +/- 0,5 mm
• mounting diameter d = 45 mm
• overall diameter d = 70x54 mm
• mounting depth (not countersunk) t = 27,6 mm
• mass m = 0,08 kg

PDF data sheet

open a bigger photo

D27TG35-06       order no. ty-D27TG35-06       EUR 39,00 excl. VAT: € 32.77 / $ 37.03
25 mm tweeter with fabric cone. Voice coil windings immersed in magnetic fluid increase short term power handling capacity.

• power handling (continuous/programme) = 100 W
• frequency range = 2000-23000 Hz
• resonance frequency fs = 912 Hz
• impedance R = 6 Ohm
• sound pressure level SPL = 92,8 dB (2,83V; 1m)
• DC resistance Re = 4,89 Ohm
• force factor BL = 2,48 N/A
• voice coil inductance L = 0,04 mH
• effective piston radiating area Sd = 7,1 cm²
• effective mechanical mass incl. air load mms = 0,2 g
• total Q factor Qts = 0,55 (Qms=1,21, Qes=1,01)
• voice coil diameter = 25 mm
• maximum peak linear excursion vibration x_lin = +/- 0,5 mm
• mounting diameter d = 81 mm
• overall diameter d = 104 mm
• mounting depth (not countersunk) t = 38,9 mm
• mass m = 0,52 kg

PDF data sheet

open a bigger photo

PLS-P830970 (WB 2,00 FR/04)       order no. ty-PLS-P830970       EUR 33,00 excl. VAT: € 27.73 / $ 31.34
full range driver with aluminium cone. The magnet system is based on Neodymium technology.

• power handling (continuous/programme) = 25 W
• frequency range = 200-20000 Hz
• resonance frequency fs = 166 Hz
• impedance R = 4 Ohm
• sound pressure level SPL = 85,3 dB (2,83V; 1m)
• DC resistance Re = 3,6 Ohm
• force factor BL = 2,79 N/A
• voice coil inductance L = 0,03 mH
• effective piston radiating area Sd = 13,9 cm²
• effective mechanical mass incl. air load mms = 1,4 g
• equivalent volume of compliance Vas = 0,18 l
• total Q factor Qts = 0,57 (Qms=3,85, Qes=0,67)
• voice coil diameter = 25 mm
• maximum peak linear excursion vibration x_lin = +/- 1,7 mm
• mounting diameter d = 50 mm
• overall diameter d = 55x55 mm
• mounting depth (not countersunk) t = 33,2 mm
• mass m = 0,14 kg

PDF data sheet

open a bigger photo

PLS-P830983 (WB 2,00 LT/04)       order no. ty-PLS-P830983       EUR 33,00 excl. VAT: € 27.73 / $ 31.34
full range driver with aluminium cone. The magnet system is based on Neodymium technology.

• power handling (continuous/programme) = 25 W
• frequency range = 200-20000 Hz
• resonance frequency fs = 176 Hz
• impedance R = 4 Ohm
• sound pressure level SPL = 85 dB (2,83V; 1m)
• DC resistance Re = 3,6 Ohm
• force factor BL = 2,83 N/A
• voice coil inductance L = 0,03 mH
• effective piston radiating area Sd = 15,2 cm²
• effective mechanical mass incl. air load mms = 1,6 g
• equivalent volume of compliance Vas = 0,16 l
• total Q factor Qts = 0,71 (Qms=5,63, Qes=0,81)
• voice coil diameter = 25 mm
• maximum peak linear excursion vibration x_lin = +/- 1,7 mm
• mounting diameter d = 50 mm
• overall diameter d = 55x55 mm
• mounting depth (not countersunk) t = 33,2 mm
• mass m = 0,14 kg

PDF data sheet

open a bigger photo

PLS-P830984 (WB 2,50 FR/08)       order no. ty-PLS-P830984       EUR 33,00 excl. VAT: € 27.73 / $ 31.34
full range driver with aluminium cone. The magnet system is based on Neodymium technology.

• power handling (continuous/programme) = 25 W
• frequency range = 100-18000 Hz
• resonance frequency fs = 111 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 83 dB (2,83V; 1m)
• DC resistance Re = 6,25 Ohm
• force factor BL = 3,27 N/A
• voice coil inductance L = 0,05 mH
• effective piston radiating area Sd = 22,2 cm²
• effective mechanical mass incl. air load mms = 2 g
• equivalent volume of compliance Vas = 0,71 l
• total Q factor Qts = 0,72 (Qms=5,41, Qes=0,83)
• voice coil diameter = 25 mm
• maximum peak linear excursion vibration x_lin = +/- 2,1 mm
• mounting diameter d = 61,6 mm
• overall diameter d = 69x69 mm
• mass m = 0,15 kg

PDF data sheet

open a bigger photo

PLS-P830985 (WB 2,50 FR/04)       order no. ty-PLS-P830985       EUR 36,00 excl. VAT: € 30.25 / $ 34.18
full range driver with aluminium cone. The magnet system is based on Neodymium technology.

• power handling (continuous/programme) = 30 W
• frequency range = 100-15000 Hz
• resonance frequency fs = 117 Hz
• impedance R = 4 Ohm
• sound pressure level SPL = 85,4 dB (2,83V; 1m)
• DC resistance Re = 3,63 Ohm
• force factor BL = 2,61 N/A
• voice coil inductance L = 0,03 mH
• effective piston radiating area Sd = 21,2 cm²
• effective mechanical mass incl. air load mms = 1,9 g
• equivalent volume of compliance Vas = 0,61 l
• total Q factor Qts = 0,63 (Qms=4,08, Qes=0,75)
• voice coil diameter = 25 mm
• maximum peak linear excursion vibration x_lin = +/- 1,7 mm
• mounting diameter d = 61,6 mm
• overall diameter d = 69x69 mm
• mass m = 0,14 kg

PDF data sheet

open a bigger photo

PLS-P830986 (WB 3,00 LT/08)       order no. ty-PLS-P830986       EUR 45,00 excl. VAT: € 37.82 / $ 42.73
full range driver with aluminium cone. The magnet system is based on Neodymium technology.

• power handling (continuous/programme) = 25 W
• frequency range = 100-15000 Hz
• resonance frequency fs = 105 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 84 dB (2,83V; 1m)
• DC resistance Re = 6,22 Ohm
• force factor BL = 3,43 N/A
• voice coil inductance L = 0,05 mH
• effective piston radiating area Sd = 27,3 cm²
• effective mechanical mass incl. air load mms = 2,6 g
• equivalent volume of compliance Vas = 0,94 l
• total Q factor Qts = 0,76 (Qms=5,15, Qes=0,89)
• voice coil diameter = 25 mm
• maximum peak linear excursion vibration x_lin = +/- 2,1 mm
• mounting diameter d = 71,9 mm
• overall diameter d = 78x78 mm
• mounting depth (not countersunk) t = 46,7 mm
• mass m = 0,21 kg

PDF data sheet

open a bigger photo

PLS-P830987 (WB 3,00 FR/08)       order no. ty-PLS-P830987       EUR 39,00 excl. VAT: € 32.77 / $ 37.03
full range driver with aluminium cone. The magnet system is based on Neodymium technology.

• power handling (continuous/programme) = 25 W
• frequency range = 100-20000 Hz
• resonance frequency fs = 108 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 83,6 dB (2,83V; 1m)
• DC resistance Re = 6,15 Ohm
• force factor BL = 3 N/A
• voice coil inductance L = 0,05 mH
• effective piston radiating area Sd = 28,8 cm²
• effective mechanical mass incl. air load mms = 2,5 g
• equivalent volume of compliance Vas = 1,03 l
• total Q factor Qts = 0,96 (Qms=6,19, Qes=1,14)
• voice coil diameter = 25 mm
• maximum peak linear excursion vibration x_lin = +/- 2,1 mm
• mounting diameter d = 72 mm
• overall diameter d = 78x78 mm
• mounting depth (not countersunk) t = 46,7 mm
• mass m = 0,22 kg

PDF data sheet

open a bigger photo

TC6FD00-04       order no. ty-TC6FD00-04       EUR 15,00 excl. VAT: € 12.61 / $ 14.24
full range driver with high quality cone.

• power handling (continuous/programme) = 15 W
• frequency range = 100-25000 Hz
• resonance frequency fs = 175 Hz
• impedance R = 4 Ohm
• sound pressure level SPL = 84,5 dB (2,83V; 1m)
• DC resistance Re = 3,54 Ohm
• force factor BL = 1,92 N/A
• voice coil inductance L = 0,02 mH
• effective piston radiating area Sd = 15,2 cm²
• effective mechanical mass incl. air load mms = 1,2 g
• equivalent volume of compliance Vas = 0,22 l
• total Q factor Qts = 0,98 (Qms=4,09, Qes=1,29)
• voice coil diameter = 20 mm
• maximum peak linear excursion vibration x_lin = +/- 1 mm
• mounting diameter d = 50 mm
• overall diameter d = 55x55 mm
• mounting depth (not countersunk) t = 32 mm
• mass m = 0,17 kg

PDF data sheet

open a bigger photo

TC7FD00-04       order no. ty-TC7FD00-04       EUR 15,00 excl. VAT: € 12.61 / $ 14.24
full range driver with high quality cone.

• power handling (continuous/programme) = 20 W
• frequency range = 100-25000 Hz
• resonance frequency fs = 143 Hz
• impedance R = 4 Ohm
• sound pressure level SPL = 86,4 dB (2,83V; 1m)
• DC resistance Re = 3,22 Ohm
• force factor BL = 1,97 N/A
• voice coil inductance L = 0,02 mH
• effective piston radiating area Sd = 22,1 cm²
• effective mechanical mass incl. air load mms = 1,6 g
• equivalent volume of compliance Vas = 0,51 l
• total Q factor Qts = 0,92 (Qms=3,66, Qes=1,22)
• voice coil diameter = 20 mm
• maximum peak linear excursion vibration x_lin = +/- 1 mm
• mounting diameter d = 58,1 mm
• overall diameter d = 70x70 mm
• mounting depth (not countersunk) t = 33,3 mm
• mass m = 0,18 kg

PDF data sheet

open a bigger photo

TC8FD00-04       order no. ty-TC8FD00-04       EUR 19,00 excl. VAT: € 15.97 / $ 18.04
full range driver with high quality cone.

• power handling (continuous/programme) = 25 W
• frequency range = 100-16000 Hz
• resonance frequency fs = 125 Hz
• impedance R = 4 Ohm
• sound pressure level SPL = 85,7 dB (2,83V; 1m)
• DC resistance Re = 3,29 Ohm
• force factor BL = 2,32 N/A
• voice coil inductance L = 0,03 mH
• effective piston radiating area Sd = 33,2 cm²
• effective mechanical mass incl. air load mms = 2,6 g
• equivalent volume of compliance Vas = 0,99 l
• total Q factor Qts = 0,92 (Qms=3,7, Qes=1,23)
• voice coil diameter = 20 mm
• maximum peak linear excursion vibration x_lin = +/- 2,4 mm
• mounting diameter d = 77,6 mm
• overall diameter d = 81,3x81,3 mm
• mounting depth (not countersunk) t = 42 mm
• mass m = 0,3 kg

PDF data sheet

open a bigger photo

TC9FD18-08       order no. ty-TC9FD-18-08       EUR 16,80 excl. VAT: € 14.12 / $ 15.95
full range driver with paper cone.

• power handling (continuous/programme) = 30 W
• frequency range = 100-20000 Hz
• resonance frequency fs = 125 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 84,6 dB (2,83V; 1m)
• DC resistance Re = 6,32 Ohm
• force factor BL = 3,01 N/A
• voice coil inductance L = 0,05 mH
• effective piston radiating area Sd = 36,3 cm²
• effective mechanical mass incl. air load mms = 2,4 g
• equivalent volume of compliance Vas = 1,24 l
• total Q factor Qts = 0,89 (Qms=2,73, Qes=1,33)
• voice coil diameter = 20 mm
• maximum peak linear excursion vibration x_lin = +/- 2,6 mm
• mounting diameter d = 77,9 mm
• overall diameter d = 84x84 mm
• mounting depth (not countersunk) t = 38,15 mm
• mass m = 0,3 kg

PDF data sheet

open a bigger photo

TG9FD10-04       order no. ty-TG9FD-10-04       EUR 28,90 excl. VAT: € 24.29 / $ 27.44
full range driver with glass fibre cone.

• power handling (continuous/programme) = 10 W
• frequency range = 100-15000 Hz
• resonance frequency fs = 113 Hz
• impedance R = 4 Ohm
• sound pressure level SPL = 87,2 dB (2,83V; 1m)
• DC resistance Re = 3,25 Ohm
• force factor BL = 2,4 N/A
• voice coil inductance L = 0,07 mH
• effective piston radiating area Sd = 36,3 cm²
• effective mechanical mass incl. air load mms = 2,8 g
• equivalent volume of compliance Vas = 1,29 l
• total Q factor Qts = 0,83 (Qms=3,04, Qes=1,14)
• voice coil diameter = 20 mm
• maximum peak linear excursion vibration x_lin = +/- 2,6 mm
• mounting diameter d = 77,9 mm
• overall diameter d = 84x84 mm
• mounting depth (not countersunk) t = 38,35 mm
• mass m = 0,3 kg

PDF data sheet

open a bigger photo

TG9FD10-08       order no. ty-TG9FD-10-08       - not available
full range driver with glass fibre cone.

• power handling (continuous/programme) = 25 W
• frequency range = 100-20000 Hz
• resonance frequency fs = 105 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 84,4 dB (2,83V; 1m)
• DC resistance Re = 6,1 Ohm
• force factor BL = 3,32 N/A
• voice coil inductance L = 0,11 mH
• effective piston radiating area Sd = 36,3 cm²
• effective mechanical mass incl. air load mms = 2,47 g
• equivalent volume of compliance Vas = 0,99 l
• total Q factor Qts = 0,73 (Qms=1,8, Qes=1,23)
• voice coil diameter = 20 mm
• maximum peak linear excursion vibration x_lin = +/- 2,6 mm
• mounting diameter d = 77,9 mm
• overall diameter d = 84x84 mm
• mounting depth (not countersunk) t = 38,35 mm
• mass m = 0,3 kg

PDF data sheet

open a bigger photo

NE65W-04       order no. ty-NE65W-04       EUR 49,00 excl. VAT: € 41.18 / $ 46.53
6 cm full range driver with aluminium cone. The magnet system is based on Neodymium technology.

• power handling (continuous/programme) = 25 W
• frequency range = 150-30000 Hz
• resonance frequency fs = 166 Hz
• impedance R = 4 Ohm
• sound pressure level SPL = 85,7 dB (2,83V; 1m)
• DC resistance Re = 3,66 Ohm
• force factor BL = 2,85 N/A
• voice coil inductance L = 0,04 mH
• effective piston radiating area Sd = 14,7 cm²
• effective mechanical mass incl. air load mms = 1,6 g
• equivalent volume of compliance Vas = 0,18 l
• total Q factor Qts = 0,64 (Qms=5,01, Qes=0,74)
• voice coil diameter = 25 mm
• maximum peak linear excursion vibration x_lin = +/- 1,7 mm
• mounting diameter d = 54,4 mm
• overall diameter d = 65 mm
• mounting depth (not countersunk) t = 37,3 mm
• mass m = 0,14 kg

PDF data sheet

open a bigger photo

NE85W-04       order no. ty-NE85W-04       EUR 49,00 excl. VAT: € 41.18 / $ 46.53
7 cm full range driver with aluminium cone. The magnet system is based on Neodymium technology.

• power handling (continuous/programme) = 25 W
• frequency range = 100-20000 Hz
• resonance frequency fs = 105 Hz
• impedance R = 4 Ohm
• sound pressure level SPL = 85 dB (2,83V; 1m)
• DC resistance Re = 3,65 Ohm
• force factor BL = 2,75 N/A
• voice coil inductance L = 0,06 mH
• effective piston radiating area Sd = 22,3 cm²
• effective mechanical mass incl. air load mms = 2,2 g
• equivalent volume of compliance Vas = 0,73 l
• total Q factor Qts = 0,64 (Qms=8,45, Qes=0,69)
• voice coil diameter = 25 mm
• maximum peak linear excursion vibration x_lin = +/- 1,8 mm
• mounting diameter d = 57,12 mm
• overall diameter d = 85 mm
• mounting depth (not countersunk) t = 51,3 mm
• mass m = 0,21 kg

PDF data sheet

open a bigger photo

NE95W-04       order no. ty-NE95W-04       EUR 56,00 excl. VAT: € 47.06 / $ 53.18
8 cm full range driver with aluminium cone. The magnet system is based on Neodymium technology.

• power handling (continuous/programme) = 25 W
• frequency range = 100-15000 Hz
• resonance frequency fs = 103 Hz
• impedance R = 4 Ohm
• sound pressure level SPL = 86 dB (2,83V; 1m)
• DC resistance Re = 3,67 Ohm
• force factor BL = 2,76 N/A
• voice coil inductance L = 0,06 mH
• effective piston radiating area Sd = 28,6 cm²
• effective mechanical mass incl. air load mms = 2,5 g
• equivalent volume of compliance Vas = 1,11 l
• total Q factor Qts = 0,72 (Qms=9,88, Qes=0,78)
• voice coil diameter = 25 mm
• maximum peak linear excursion vibration x_lin = +/- 1,8 mm
• mounting diameter d = 64,7 mm
• overall diameter d = 95 mm
• mounting depth (not countersunk) t = 53,7 mm
• mass m = 0,24 kg

PDF data sheet

open a bigger photo

recommended cabinet 1:
closed cabinet with 1,2 L volume
from 113/72 Hz (-3dB/-8dB)
 
recommended cabinet 2:
4,9 L volume bass reflex cabinet
with HP35 reflex tube, 13 cm long.
from 54/45 Hz (-3dB/-8dB).

SDS-P830855 (SDS 4-25/08)       order no. ty-SDS-P830855       EUR 36,00 excl. VAT: € 30.25 / $ 34.18
11 cm bass-midrange driver with paper cone.

• power handling (continuous/programme) = 30 W
• frequency range = 60-4000 Hz
• resonance frequency fs = 63,3 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 84,8 dB (2,83V; 1m)
• DC resistance Re = 5,6 Ohm
• force factor BL = 5,58 N/A
• voice coil inductance L = 0,24 mH
• effective piston radiating area Sd = 50,3 cm²
• effective mechanical mass incl. air load mms = 6,9 g
• equivalent volume of compliance Vas = 3,28 l
• total Q factor Qts = 0,44 (Qms=4,66, Qes=0,49)
• voice coil diameter = 25 mm
• maximum peak linear excursion vibration x_lin = +/- 3 mm
• mounting diameter d = 92,5 mm
• overall diameter d = 123,3 mm
• mounting depth (not countersunk) t = 54,5 mm
• mass m = 0,74 kg

PDF data sheet

open a bigger photo

recommended cabinet 1:
closed cabinet with 0,65 L volume
from 143/90 Hz (-3dB/-8dB)
 
recommended cabinet 2:
2,2 L volume bass reflex cabinet
with HP35 reflex tube, 20 cm long.
from 74/58 Hz (-3dB/-8dB).

SDS-P830856 (SDS 106TV)       order no. ty-830856       EUR 44,00 excl. VAT: € 36.97 / $ 41.78
11 cm bass-midrange driver with paper cone. The driver is magnetically shielded.

• frequency range = 60-3000 Hz
• resonance frequency fs = 62,4 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 85,7 dB (2,83V; 1m)
• DC resistance Re = 5,6 Ohm
• force factor BL = 6,2 N/A
• voice coil inductance L = 0,9 mH
• effective piston radiating area Sd = 49 cm²
• effective mechanical mass incl. air load mms = 6,6 g
• equivalent volume of compliance Vas = 3,3 l
• total Q factor Qts = 0,35 (Qms=3,8, Qes=0,38)
• voice coil diameter = 26 mm
• maximum peak linear excursion vibration x_lin = +/- 3 mm
• mounting diameter d = 93 mm
• overall diameter d = 124 mm
• mounting depth (not countersunk) t = 65,8 mm

PDF data sheet

open a bigger photo

recommended cabinet 1:
closed cabinet with 8,3 L volume
from 78/49 Hz (-3dB/-8dB)
 
recommended cabinet 2:
32 L volume bass reflex cabinet
with HP70 reflex tube, 15 cm long.
from 35/31 Hz (-3dB/-8dB).

SDS-P830656 (SDS-5-25/08)       order no. ty-SDS-P830656       EUR 25,00 excl. VAT: € 21.01 / $ 23.74
14 cm bass-midrange driver with paper cone.

• power handling (continuous/programme) = 60 W
• frequency range = 60-5000 Hz
• resonance frequency fs = 57 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 85,7 dB (2,83V; 1m)
• DC resistance Re = 6,06 Ohm
• force factor BL = 5,36 N/A
• voice coil inductance L = 0,37 mH
• effective piston radiating area Sd = 86,6 cm²
• effective mechanical mass incl. air load mms = 9,3 g
• equivalent volume of compliance Vas = 8,77 l
• total Q factor Qts = 0,59 (Qms=3,6, Qes=0,7)
• voice coil diameter = 25 mm
• maximum peak linear excursion vibration x_lin = +/- 3,5 mm
• mounting diameter d = 117 mm
• overall diameter d = 152 mm
• mounting depth (not countersunk) t = 58,4 mm
• mass m = 0,68 kg

PDF data sheet

open a bigger photo

recommended cabinet 1:
closed cabinet with 12,4 L volume
from 79/50 Hz (-3dB/-8dB)
 
recommended cabinet 2:
50 L volume bass reflex cabinet
with HP70 reflex tube, 8 cm long.
from 37/31 Hz (-3dB/-8dB).

SDS-P830657 (SDS 6-25/08)       order no. ty-SDS-P830657       EUR 30,00 excl. VAT: € 25.21 / $ 28.49
16 cm bass-midrange driver with paper cone.

• power handling (continuous/programme) = 60 W
• frequency range = 60-3000 Hz
• resonance frequency fs = 45 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 89,5 dB (2,83V; 1m)
• DC resistance Re = 6,05 Ohm
• force factor BL = 5,98 N/A
• voice coil inductance L = 0,38 mH
• effective piston radiating area Sd = 141 cm²
• effective mechanical mass incl. air load mms = 11,5 g
• equivalent volume of compliance Vas = 30,8 l
• total Q factor Qts = 0,46 (Qms=2,74, Qes=0,55)
• voice coil diameter = 25 mm
• maximum peak linear excursion vibration x_lin = +/- 3,5 mm
• mounting diameter d = 144 mm
• overall diameter d = 182 mm
• mounting depth (not countersunk) t = 72,1 mm
• mass m = 0,84 kg

PDF data sheet

open a bigger photo

recommended cabinet 1:
closed cabinet with 1,5 L volume
from 136/86 Hz (-3dB/-8dB)
 
recommended cabinet 2:
6,2 L volume bass reflex cabinet
with HP50 reflex tube, 14 cm long.
from 62/53 Hz (-3dB/-8dB).

HDS-P830870 (HDS-PPB 4-25/08)       order no. ty-HDS-P830870       EUR 49,00 excl. VAT: € 41.18 / $ 46.53
11 cm bass-midrange driver with polypropylene cone.

• power handling (continuous/programme) = 25 W
• frequency range = 80-7000 Hz
• resonance frequency fs = 91 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 85,9 dB (2,83V; 1m)
• DC resistance Re = 5,17 Ohm
• force factor BL = 4,94 N/A
• voice coil inductance L = 0,16 mH
• effective piston radiating area Sd = 56,8 cm²
• effective mechanical mass incl. air load mms = 6,1 g
• equivalent volume of compliance Vas = 2,28 l
• total Q factor Qts = 0,53 (Qms=1,92, Qes=0,74)
• voice coil diameter = 25 mm
• maximum peak linear excursion vibration x_lin = +/- 3 mm
• mounting diameter d = 94,8 mm
• overall diameter d = 120,4 mm
• mounting depth (not countersunk) t = 55,3 mm
• mass m = 0,92 kg

PDF data sheet

open a bigger photo

recommended cabinet 1:
closed cabinet with 3,6 L volume
from 106/67 Hz (-3dB/-8dB)
 
recommended cabinet 2:
14,6 L volume bass reflex cabinet
with HP70 reflex tube, 19 cm long.
from 50/42 Hz (-3dB/-8dB).

HDS-P830860 (HDS-PPB 5-25/08)       order no. ty-HDS-P830860       EUR 58,00 excl. VAT: € 48.74 / $ 55.08
bass-midrange driver with polypropylene cone.

• power handling (continuous/programme) = 50 W
• frequency range = 50-6000 Hz
• resonance frequency fs = 62 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 87,5 dB (2,83V; 1m)
• DC resistance Re = 5,9 Ohm
• force factor BL = 5,9 N/A
• voice coil inductance L = 0,27 mH
• effective piston radiating area Sd = 89,9 cm²
• effective mechanical mass incl. air load mms = 9 g
• equivalent volume of compliance Vas = 8,41 l
• total Q factor Qts = 0,47 (Qms=2,21, Qes=0,59)
• voice coil diameter = 25 mm
• maximum peak linear excursion vibration x_lin = +/- 3,5 mm
• overall diameter d = 151,8 mm
• mounting depth (not countersunk) t = 61,3 mm
• mass m = 1,06 kg

PDF data sheet

open a bigger photo

recommended cabinet 1:
closed cabinet with 4,2 L volume
from 109/69 Hz (-3dB/-8dB)
 
recommended cabinet 2:
16 L volume bass reflex cabinet
with HP70 reflex tube, 16 cm long.
from 53/43 Hz (-3dB/-8dB).

HDS-P830874 (HDS-PPB 6-33/08)       order no. ty-HDS-P830874       on request
16 cm bass-midrange driver with polypropylene cone.

• power handling (continuous/programme) = 75 W
• frequency range = 50-4000 Hz
• resonance frequency fs = 58 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 88,4 dB (2,83V; 1m)
• DC resistance Re = 6,5 Ohm
• force factor BL = 8,82 N/A
• voice coil inductance L = 0,42 mH
• effective piston radiating area Sd = 143,1 cm²
• effective mechanical mass incl. air load mms = 17,3 g
• equivalent volume of compliance Vas = 12,5 l
• total Q factor Qts = 0,43 (Qms=2,29, Qes=0,53)
• voice coil diameter = 32 mm
• maximum peak linear excursion vibration x_lin = +/- 5,3 mm
• mounting diameter d = 145,2 mm
• overall diameter d = 182 mm
• mounting depth (not countersunk) t = 78 mm
• mass m = 1,58 kg

PDF data sheet

open a bigger photo

recommended cabinet 1:
closed cabinet with 5,5 L volume
from 91/57 Hz (-3dB/-8dB)
 
recommended cabinet 2:
20 L volume bass reflex cabinet
with HP70 reflex tube, 20 cm long.
from 46/37 Hz (-3dB/-8dB).

HDS-P830883 (HDS-E 6-33/08)       order no. ty-HDS-P830883       EUR 89,00 excl. VAT: € 74.79 / $ 84.51
16 cm bass-midrange driver with paper cone.

• power handling (continuous/programme) = 70 W
• frequency range = 40-3000 Hz
• resonance frequency fs = 43 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 87,5 dB (2,83V; 1m)
• DC resistance Re = 5,85 Ohm
• force factor BL = 7,7 N/A
• voice coil inductance L = 0,18 mH
• effective piston radiating area Sd = 143,1 cm²
• effective mechanical mass incl. air load mms = 17,3 g
• equivalent volume of compliance Vas = 22,9 l
• total Q factor Qts = 0,38 (Qms=2,18, Qes=0,46)
• voice coil diameter = 32 mm
• maximum peak linear excursion vibration x_lin = +/- 5,6 mm
• mounting diameter d = 146 mm
• overall diameter d = 180 mm
• mounting depth (not countersunk) t = 78 mm
• mass m = 1,64 kg

PDF data sheet

open a bigger photo

recommended cabinet 1:
closed cabinet with 4,9 L volume
from 100/63 Hz (-3dB/-8dB)
 
recommended cabinet 2:
17 L volume bass reflex cabinet
with HP70 reflex tube, 19 cm long.
from 51/40 Hz (-3dB/-8dB).

HDS-P830875 (HDS-N 6-33/08)       order no. ty-HDS-P830875       EUR 75,00 excl. VAT: € 63.03 / $ 71.22
16 cm bass-midrange driver with high quality cone.

• power handling (continuous/programme) = 75 W
• frequency range = 40-2000 Hz
• resonance frequency fs = 46 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 89 dB (2,83V; 1m)
• DC resistance Re = 6,37 Ohm
• force factor BL = 8,47 N/A
• voice coil inductance L = 0,41 mH
• effective piston radiating area Sd = 143,1 cm²
• effective mechanical mass incl. air load mms = 15,9 g
• equivalent volume of compliance Vas = 21,8 l
• total Q factor Qts = 0,36 (Qms=3,19, Qes=0,41)
• voice coil diameter = 32 mm
• maximum peak linear excursion vibration x_lin = +/- 5,3 mm
• mounting diameter d = 145,2 mm
• overall diameter d = 182,3 mm
• mounting depth (not countersunk) t = 78 mm
• mass m = 1,56 kg

PDF data sheet

open a bigger photo

recommended cabinet 1:
closed cabinet with 13 L volume
from 76/48 Hz (-3dB/-8dB)
 
recommended cabinet 2:
39 L volume bass reflex cabinet
with HP100 reflex tube, 32 cm long.
from 42/32 Hz (-3dB/-8dB).

HDS-P830869 (HDS-N 8-33/08)       order no. ty-HDS-P830869       EUR 92,00 excl. VAT: € 77.31 / $ 87.36
21 cm bass driver with high quality cone.

• power handling (continuous/programme) = 60 W
• frequency range = 30-1500 Hz
• resonance frequency fs = 29,6 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 89,3 dB (2,83V; 1m)
• DC resistance Re = 5,8 Ohm
• force factor BL = 8,92 N/A
• voice coil inductance L = 0,63 mH
• effective piston radiating area Sd = 227 cm²
• effective mechanical mass incl. air load mms = 24 g
• equivalent volume of compliance Vas = 87,41 l
• total Q factor Qts = 0,31 (Qms=4,4, Qes=0,33)
• maximum peak linear excursion vibration x_lin = +/- 5,5 mm
• mounting diameter d = 190 mm
• overall diameter d = 225 mm
• mounting depth (not countersunk) t = 89,5 mm
• mass m = 1,74 kg

PDF data sheet

open a bigger photo

HDS-P835023 (HDS-AL 4-25/08)       order no. ty-HDS-P835023       EUR 79,00 excl. VAT: € 66.39 / $ 75.02
11 cm bass-midrange driver with aluminium cone.

• power handling (continuous/programme) = 30 W
• frequency range = 70-5000 Hz
• resonance frequency fs = 82 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 84 dB (2,83V; 1m)
• DC resistance Re = 5,32 Ohm
• force factor BL = 5,01 N/A
• voice coil inductance L = 0,26 mH
• effective piston radiating area Sd = 56,8 cm²
• effective mechanical mass incl. air load mms = 7,3 g
• equivalent volume of compliance Vas = 2,33 l
• total Q factor Qts = 0,62 (Qms=2,81, Qes=0,8)
• voice coil diameter = 25 mm
• maximum peak linear excursion vibration x_lin = +/- 3,1 mm
• mounting diameter d = 94,8 mm
• overall diameter d = 120 mm
• mounting depth (not countersunk) t = 55,3 mm
• mass m = 0,91 kg

PDF data sheet

open a bigger photo

HDS-P835024 (HDS-AL 5-25/08)       order no. ty-HDS-P835024       EUR 89,00 excl. VAT: € 74.79 / $ 84.51
bass-midrange driver with aluminium cone.

• power handling (continuous/programme) = 30 W
• frequency range = 60-6000 Hz
• resonance frequency fs = 72 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 86 dB (2,83V; 1m)
• DC resistance Re = 5,91 Ohm
• force factor BL = 5,88 N/A
• voice coil inductance L = 0,24 mH
• effective piston radiating area Sd = 91,6 cm²
• effective mechanical mass incl. air load mms = 10,6 g
• equivalent volume of compliance Vas = 5,39 l
• total Q factor Qts = 0,65 (Qms=3,18, Qes=0,82)
• voice coil diameter = 30 mm
• maximum peak linear excursion vibration x_lin = +/- 3,5 mm
• overall diameter d = 151,8 mm
• mounting depth (not countersunk) t = 61,3 mm
• mass m = 1,06 kg

PDF data sheet

open a bigger photo

recommended cabinet 1:
closed cabinet with 2,3 L volume
from 122/77 Hz (-3dB/-8dB)
 
recommended cabinet 2:
8,8 L volume bass reflex cabinet
with HP50 reflex tube, 12 cm long.
from 54/48 Hz (-3dB/-8dB).

HDS-P830992 (HDS-GFP 4-25/08)       order no. ty-HDS-P830992       EUR 59,00 excl. VAT: € 49.58 / $ 56.03
11 cm bass-midrange driver with glass fibre cone.

• power handling (continuous/programme) = 30 W
• frequency range = 70-4000 Hz
• resonance frequency fs = 89 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 86 dB (2,83V; 1m)
• DC resistance Re = 5,25 Ohm
• force factor BL = 4,91 N/A
• voice coil inductance L = 0,24 mH
• effective piston radiating area Sd = 56,1 cm²
• effective mechanical mass incl. air load mms = 5,9 g
• equivalent volume of compliance Vas = 2,41 l
• total Q factor Qts = 0,58 (Qms=2,95, Qes=0,72)
• voice coil diameter = 30 mm
• maximum peak linear excursion vibration x_lin = +/- 3 mm
• mounting diameter d = 94,8 mm
• overall diameter d = 120,4 mm
• mounting depth (not countersunk) t = 55,3 mm
• mass m = 0,91 kg

PDF data sheet

open a bigger photo

recommended cabinet 1:
closed cabinet with 3,3 L volume
from 109/69 Hz (-3dB/-8dB)
 
recommended cabinet 2:
13,5 L volume bass reflex cabinet
with HP70 reflex tube, 20 cm long.
from 51/43 Hz (-3dB/-8dB).

HDS-P830991 (HDS-GFP 5-25/08)       order no. ty-HDS-P830991       EUR 69,00 excl. VAT: € 57.98 / $ 65.52
bass-midrange driver with glass fibre cone.

• power handling (continuous/programme) = 30 W
• frequency range = 60-6000 Hz
• resonance frequency fs = 66 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 87 dB (2,83V; 1m)
• DC resistance Re = 5,99 Ohm
• force factor BL = 6,42 N/A
• voice coil inductance L = 0,33 mH
• effective piston radiating area Sd = 89,9 cm²
• effective mechanical mass incl. air load mms = 9,7 g
• equivalent volume of compliance Vas = 6,81 l
• total Q factor Qts = 0,48 (Qms=2,96, Qes=0,58)
• voice coil diameter = 30 mm
• maximum peak linear excursion vibration x_lin = +/- 4,6 mm
• overall diameter d = 151,8 mm
• mounting depth (not countersunk) t = 61,3 mm
• mass m = 1,05 kg

PDF data sheet

open a bigger photo

recommended cabinet 1:
closed cabinet with 5,2 L volume
from 95/60 Hz (-3dB/-8dB)
 
recommended cabinet 2:
19 L volume bass reflex cabinet
with HP70 reflex tube, 19 cm long.
from 48/38 Hz (-3dB/-8dB).

HDS-P830990 (HDS-GFP 6/08)       order no. ty-HDS-P830990       EUR 95,00 excl. VAT: € 79.83 / $ 90.21
16 cm bass-midrange driver with glass fibre cone.

• power handling (continuous/programme) = 50 W
• frequency range = 40-2000 Hz
• resonance frequency fs = 46 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 88,4 dB (2,83V; 1m)
• DC resistance Re = 6,23 Ohm
• force factor BL = 8,32 N/A
• voice coil inductance L = 0,42 mH
• effective piston radiating area Sd = 143,1 cm²
• effective mechanical mass incl. air load mms = 17 g
• equivalent volume of compliance Vas = 20,09 l
• total Q factor Qts = 0,39 (Qms=3,12, Qes=0,44)
• voice coil diameter = 32 mm
• maximum peak linear excursion vibration x_lin = +/- 5,3 mm
• mounting diameter d = 145,2 mm
• overall diameter d = 182,3 mm
• mounting depth (not countersunk) t = 78 mm
• mass m = 1,58 kg

PDF data sheet

open a bigger photo

recommended cabinet 1:
closed cabinet with 0,29 L volume
from 163/103 Hz (-3dB/-8dB)
 
recommended cabinet 2:
1 L volume bass reflex cabinet
with HP35 reflex tube, 35 cm long.
from 84/66 Hz (-3dB/-8dB).

SLS-85S25CP04-04       order no. ty-SLS-85S25CP04-04       EUR 29,00 excl. VAT: € 24.37 / $ 27.54
9 cm bass driver with paper cone.

• power handling (continuous/programme) = 30 W
• frequency range = 70-2000 Hz
• resonance frequency fs = 73 Hz
• impedance R = 4 Ohm
• sound pressure level SPL = 86 dB (2,83V; 1m)
• DC resistance Re = 3,18 Ohm
• force factor BL = 4,31 N/A
• voice coil inductance L = 0,16 mH
• effective piston radiating area Sd = 30,8 cm²
• effective mechanical mass incl. air load mms = 4,7 g
• equivalent volume of compliance Vas = 1,39 l
• total Q factor Qts = 0,35 (Qms=5,38, Qes=0,37)
• voice coil diameter = 25 mm
• maximum peak linear excursion vibration x_lin = +/- 4,5 mm
• mounting diameter d = 75,4 mm
• overall diameter d = 105 mm
• mounting depth (not countersunk) t = 69,7 mm
• mass m = 0,88 kg

PDF data sheet

open a bigger photo

recommended cabinet 1:
closed cabinet with 0,43 L volume
from 145/92 Hz (-3dB/-8dB)
 
recommended cabinet 2:
1,6 L volume bass reflex cabinet
with HP35 reflex tube, 26 cm long.
from 72/58 Hz (-3dB/-8dB).

SLS-85S25CP04-08       order no. ty-SLS-85S25CP04-08       EUR 29,00 excl. VAT: € 24.37 / $ 27.54
9 cm bass driver with paper cone.

• power handling (continuous/programme) = 25 W
• frequency range = 70-2000 Hz
• resonance frequency fs = 74 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 83 dB (2,83V; 1m)
• DC resistance Re = 6,43 Ohm
• force factor BL = 5,4 N/A
• voice coil inductance L = 0,27 mH
• effective piston radiating area Sd = 30,8 cm²
• effective mechanical mass incl. air load mms = 4,3 g
• equivalent volume of compliance Vas = 1,48 l
• total Q factor Qts = 0,4 (Qms=4,95, Qes=0,44)
• voice coil diameter = 25 mm
• maximum peak linear excursion vibration x_lin = +/- 4,5 mm
• mounting diameter d = 75,4 mm
• overall diameter d = 105 mm
• mounting depth (not countersunk) t = 69,7 mm
• mass m = 0,88 kg

PDF data sheet

open a bigger photo

recommended cabinet 1:
closed cabinet with 1,2 L volume
from 140/88 Hz (-3dB/-8dB)
 
recommended cabinet 2:
3,9 L volume bass reflex cabinet
with HP35 reflex tube, 11 cm long.
from 73/57 Hz (-3dB/-8dB).

NE123W-08       order no. ty-NE123W-08       EUR 128,00 excl. VAT: € 107.56 / $ 121.55
11 cm bass-midrange driver with paper cone.

• power handling (continuous/programme) = 45 W
• frequency range = 60-10000 Hz
• resonance frequency fs = 61 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 87 dB (2,83V; 1m)
• DC resistance Re = 6,27 Ohm
• force factor BL = 5,53 N/A
• voice coil inductance L = 0,06 mH
• effective piston radiating area Sd = 54,1 cm²
• effective mechanical mass incl. air load mms = 4,7 g
• equivalent volume of compliance Vas = 5,89 l
• total Q factor Qts = 0,34 (Qms=4,98, Qes=0,37)
• voice coil diameter = 32 mm
• maximum peak linear excursion vibration x_lin = +/- 4,2 mm
• mounting diameter d = 93 mm
• overall diameter d = 123 mm
• mounting depth (not countersunk) t = 56,3 mm
• mass m = 0,41 kg

PDF data sheet

open a bigger photo

recommended cabinet 1:
closed cabinet with 2,1 L volume
from 114/72 Hz (-3dB/-8dB)
 
recommended cabinet 2:
7,4 L volume bass reflex cabinet
with HP50 reflex tube, 18 cm long.
from 58/46 Hz (-3dB/-8dB).

NE149W-08 (14NE240/8)       order no. ty-NE149W-08       EUR 188,00 excl. VAT: € 157.98 / $ 178.52
13 cm bass-midrange driver with paper cone.

• power handling (continuous/programme) = 60 W
• frequency range = 50-6000 Hz
• resonance frequency fs = 54 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 87 dB (2,83V; 1m)
• DC resistance Re = 6,33 Ohm
• force factor BL = 7,42 N/A
• voice coil inductance L = 0,08 mH
• effective piston radiating area Sd = 85 cm²
• effective mechanical mass incl. air load mms = 10,3 g
• equivalent volume of compliance Vas = 8,54 l
• total Q factor Qts = 0,38 (Qms=8,19, Qes=0,4)
• voice coil diameter = 38,44 mm
• maximum peak linear excursion vibration x_lin = +/- 5 mm
• mounting diameter d = 115,7 mm
• overall diameter d = 149 mm
• mounting depth (not countersunk) t = 81 mm
• mass m = 0,68 kg

PDF data sheet

open a bigger photo

recommended cabinet 1:
closed cabinet with 5,9 L volume
from 87/55 Hz (-3dB/-8dB)
 
recommended cabinet 2:
21 L volume bass reflex cabinet
with HP70 reflex tube, 20 cm long.
from 43/35 Hz (-3dB/-8dB).

NE180W-08       order no. ty-NE180W-08       EUR 189,00 excl. VAT: € 158.82 / $ 179.47
16 cm bass-midrange driver with paper cone.

• power handling (continuous/programme) = 80 W
• frequency range = 40-2000 Hz
• resonance frequency fs = 42 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 87 dB (2,83V; 1m)
• DC resistance Re = 6,24 Ohm
• force factor BL = 8,17 N/A
• voice coil inductance L = 0,12 mH
• effective piston radiating area Sd = 136,9 cm²
• effective mechanical mass incl. air load mms = 16,4 g
• equivalent volume of compliance Vas = 22,72 l
• total Q factor Qts = 0,39 (Qms=7,41, Qes=0,41)
• voice coil diameter = 39 mm
• maximum peak linear excursion vibration x_lin = +/- 5 mm
• mounting diameter d = 148,5 mm
• overall diameter d = 179,8 mm
• mounting depth (not countersunk) t = 82,3 mm
• mass m = 2,08 kg

PDF data sheet

open a bigger photo

BC18WG59-04       order no. ty-BC18WG59-04       EUR 39,00 excl. VAT: € 32.77 / $ 37.03
16 cm bass-midrange driver with paper cone.

• power handling (continuous/programme) = 30 W
• frequency range = 50-3000 Hz
• resonance frequency fs = 56 Hz
• impedance R = 4 Ohm
• sound pressure level SPL = 91 dB (2,83V; 1m)
• DC resistance Re = 3,02 Ohm
• force factor BL = 4,23 N/A
• voice coil inductance L = 0,16 mH
• effective piston radiating area Sd = 138,9 cm²
• effective mechanical mass incl. air load mms = 12,4 g
• equivalent volume of compliance Vas = 17,53 l
• total Q factor Qts = 0,6 (Qms=3,04, Qes=0,74)
• voice coil diameter = 25 mm
• maximum peak linear excursion vibration x_lin = +/- 3,8 mm
• mounting diameter d = 147 mm
• overall diameter d = 180 mm
• mounting depth (not countersunk) t = 66,6 mm
• mass m = 0,7 kg

PDF data sheet

open a bigger photo

GBS-135F25AL02-04       order no. ty-GBS-135F25AL02-04       EUR 49,00 excl. VAT: € 41.18 / $ 46.53
14 cm bass-midrange driver with aluminium cone.

• power handling (continuous/programme) = 35 W
• frequency range = 60-2000 Hz
• resonance frequency fs = 63 Hz
• impedance R = 4 Ohm
• sound pressure level SPL = 88,5 dB (2,83V; 1m)
• DC resistance Re = 3,28 Ohm
• force factor BL = 4,91 N/A
• voice coil inductance L = 0,21 mH
• effective piston radiating area Sd = 85,7 cm²
• effective mechanical mass incl. air load mms = 12,3 g
• equivalent volume of compliance Vas = 5,35 l
• total Q factor Qts = 0,57 (Qms=4,12, Qes=0,66)
• voice coil diameter = 25 mm
• maximum peak linear excursion vibration x_lin = +/- 3,3 mm
• mounting diameter d = 119 mm
• overall diameter d = 152 mm
• mounting depth (not countersunk) t = 27,4 mm
• mass m = 0,8 kg

PDF data sheet

open a bigger photo

recommended cabinet 1:
closed cabinet with 2,2 L volume
from 185/117 Hz (-3dB/-8dB)
 
recommended cabinet 2:
9,1 L volume bass reflex cabinet
with HP70 reflex tube, 8 cm long.
from 87/73 Hz (-3dB/-8dB).

FSL-0512R01-08       order no. ty-FSL-0512R01-08       EUR 34,00 excl. VAT: € 28.57 / $ 32.29
14 cm midrange driver with paper cone.

• power handling (continuous/programme) = 90 W
• frequency range = 100-5000 Hz
• resonance frequency fs = 108 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 91,4 dB (2,83V; 1m)
• DC resistance Re = 5,71 Ohm
• force factor BL = 6,23 N/A
• voice coil inductance L = 0,23 mH
• effective piston radiating area Sd = 105,7 cm²
• effective mechanical mass incl. air load mms = 6,5 g
• equivalent volume of compliance Vas = 5,23 l
• total Q factor Qts = 0,47 (Qms=1,65, Qes=0,65)
• voice coil diameter = 30 mm
• maximum peak linear excursion vibration x_lin = +/- 3,9 mm
• mounting diameter d = 125 mm
• overall diameter d = 150 mm
• mounting depth (not countersunk) t = 61,5 mm
• mass m = 0,94 kg

PDF data sheet

open a bigger photo

recommended cabinet 1:
closed cabinet with 3,4 L volume
from 157/99 Hz (-3dB/-8dB)
 
recommended cabinet 2:
12,9 L volume bass reflex cabinet
with HP70 reflex tube, 8 cm long.
from 77/62 Hz (-3dB/-8dB).

FSL-0615R02-08       order no. ty-FSL-0615R02-08       EUR 38,00 excl. VAT: € 31.93 / $ 36.08
16 cm bass-midrange driver with paper cone.

• power handling (continuous/programme) = 100 W
• frequency range = 80-3000 Hz
• resonance frequency fs = 79,8 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 93,6 dB (2,83V; 1m)
• DC resistance Re = 5,14 Ohm
• force factor BL = 7,37 N/A
• voice coil inductance L = 0,34 mH
• effective piston radiating area Sd = 143,1 cm²
• effective mechanical mass incl. air load mms = 9,9 g
• equivalent volume of compliance Vas = 11,61 l
• total Q factor Qts = 0,41 (Qms=2,95, Qes=0,47)
• voice coil diameter = 39 mm
• maximum peak linear excursion vibration x_lin = +/- 2,6 mm
• mounting diameter d = 146 mm
• overall diameter d = 174,2 mm
• mounting depth (not countersunk) t = 76,7 mm
• mass m = 1,48 kg

PDF data sheet

open a bigger photo

recommended cabinet 1:
closed cabinet with 2,5 L volume
from 91/57 Hz (-3dB/-8dB)
 
recommended cabinet 2:
8,9 L volume bass reflex cabinet
with HP50 reflex tube, 25 cm long.
from 47/37 Hz (-3dB/-8dB).

SLS-P830946 (SLS W 6-39/04)       order no. ty-SLS-P830946       EUR 74,00 excl. VAT: € 62.18 / $ 70.27
17 cm bass driver with paper cone.

• power handling (continuous/programme) = 75 W
• frequency range = 40-500 Hz
• resonance frequency fs = 42 Hz
• impedance R = 4 Ohm
• sound pressure level SPL = 86,7 dB (2,83V; 1m)
• DC resistance Re = 2,73 Ohm
• force factor BL = 7,6 N/A
• voice coil inductance L = 0,65 mH
• effective piston radiating area Sd = 123,5 cm²
• effective mechanical mass incl. air load mms = 30,5 g
• equivalent volume of compliance Vas = 11,2 l
• total Q factor Qts = 0,35 (Qms=4,92, Qes=0,38)
• voice coil diameter = 39 mm
• maximum peak linear excursion vibration x_lin = +/- 8,2 mm
• mounting diameter d = 146 mm
• overall diameter d = 182 mm
• mounting depth (not countersunk) t = 83 mm
• mass m = 2,4 kg

PDF data sheet

open a bigger photo

SLS-P830667 (SLS 8-39/08)       order no. ty-SLS-P830667       EUR 79,00 excl. VAT: € 66.39 / $ 75.02
20 cm bass driver with paper cone.

• power handling (continuous/programme) = 90 W
• frequency range = 30-800 Hz
• resonance frequency fs = 42 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 86,7 dB (2,83V; 1m)
• DC resistance Re = 5,53 Ohm
• force factor BL = 8,26 N/A
• voice coil inductance L = 0,78 mH
• effective piston radiating area Sd = 213,8 cm²
• effective mechanical mass incl. air load mms = 34,8 g
• equivalent volume of compliance Vas = 26,27 l
• total Q factor Qts = 0,66 (Qms=5,73, Qes=0,75)
• voice coil diameter = 39 mm
• maximum peak linear excursion vibration x_lin = +/- 8,4 mm
• mounting diameter d = 177 mm
• overall diameter d = 213 mm
• mounting depth (not countersunk) t = 101,2 mm
• mass m = 2,52 kg

PDF data sheet

open a bigger photo

recommended cabinet 1:
closed cabinet with 52 L volume
from 48/30 Hz (-3dB/-8dB)
 
recommended cabinet 2:
211 L volume bass reflex cabinet
with HP100 reflex tube, 11 cm long.
from 22/19 Hz (-3dB/-8dB).

SLS-P830668 (SLS 10-39/08)       order no. ty-SLS-P830668       EUR 98,00 excl. VAT: € 82.35 / $ 93.06
24 cm bass driver with paper cone.

• power handling (continuous/programme) = 70 W
• frequency range = 30-1000 Hz
• resonance frequency fs = 32,4 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 87,9 dB (2,83V; 1m)
• DC resistance Re = 5,61 Ohm
• force factor BL = 10,42 N/A
• voice coil inductance L = 1,37 mH
• effective piston radiating area Sd = 346,4 cm²
• effective mechanical mass incl. air load mms = 56,3 g
• equivalent volume of compliance Vas = 72,9 l
• total Q factor Qts = 0,55 (Qms=7,15, Qes=0,59)
• voice coil diameter = 39 mm
• maximum peak linear excursion vibration x_lin = +/- 8,3 mm
• mounting diameter d = 223 mm
• overall diameter d = 262,3 mm
• mounting depth (not countersunk) t = 126,3 mm
• mass m = 2,7 kg

PDF data sheet

open a bigger photo

recommended cabinet 1:
closed cabinet with 89 L volume
from 47/30 Hz (-3dB/-8dB)
 
recommended cabinet 2:
362 L volume bass reflex cabinet
with 2x HP100 reflex tube, 10 cm long.
from 21/18 Hz (-3dB/-8dB).

SLS-P830669 (SLS 12-39/08)       order no. ty-SLS-P830669       EUR 108,00 excl. VAT: € 90.76 / $ 102.55
30 cm bass driver with paper cone.

• power handling (continuous/programme) = 100 W
• frequency range = 30-1000 Hz
• resonance frequency fs = 31,5 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 90 dB (2,83V; 1m)
• DC resistance Re = 5,6 Ohm
• force factor BL = 11,88 N/A
• voice coil inductance L = 1,12 mH
• effective piston radiating area Sd = 522,8 cm²
• effective mechanical mass incl. air load mms = 74,1 g
• equivalent volume of compliance Vas = 132,42 l
• total Q factor Qts = 0,54 (Qms=7,07, Qes=0,58)
• voice coil diameter = 39 mm
• maximum peak linear excursion vibration x_lin = +/- 8,3 mm
• mounting diameter d = 277 mm
• overall diameter d = 314 mm
• mounting depth (not countersunk) t = 139,8 mm
• mass m = 3,24 kg

PDF data sheet

open a bigger photo

SBS-200F35AL01-04       order no. ty-SBS-200F35AL01-04       EUR 89,00 excl. VAT: € 74.79 / $ 84.51
bass driver with aluminium cone.

• power handling (continuous/programme) = 200 W
• frequency range = 30-500 Hz
• resonance frequency fs = 44 Hz
• impedance R = 4 Ohm
• sound pressure level SPL = 84,1 dB (2,83V; 1m)
• DC resistance Re = 3,97 Ohm
• force factor BL = 10 N/A
• voice coil inductance L = 0,96 mH
• effective piston radiating area Sd = 213,8 cm²
• effective mechanical mass incl. air load mms = 70,4 g
• equivalent volume of compliance Vas = 11,78 l
• total Q factor Qts = 0,7 (Qms=6,38, Qes=0,78)
• voice coil diameter = 35,55 mm
• maximum peak linear excursion vibration x_lin = +/- 9,1 mm
• overall diameter d = 225 mm
• mounting depth (not countersunk) t = 113,6 mm
• mass m = 2,18 kg

PDF data sheet

open a bigger photo

recommended cabinet 1:
closed cabinet with 14,7 L volume
from 51/32 Hz (-3dB/-8dB)
 
recommended cabinet 2:
60 L volume bass reflex cabinet
with HP70 reflex tube, 20 cm long.
from 24/20 Hz (-3dB/-8dB).

SBS-250F38AL01-04       order no. ty-SBS-250F38AL01-04       EUR 144,00 excl. VAT: € 121.01 / $ 136.74
25 cm bass driver with aluminium cone.

• power handling (continuous/programme) = 250 W
• frequency range = 30-500 Hz
• resonance frequency fs = 33 Hz
• impedance R = 4 Ohm
• sound pressure level SPL = 85,2 dB (2,83V; 1m)
• DC resistance Re = 2,1 Ohm
• force factor BL = 9,9 N/A
• voice coil inductance L = 1 mH
• effective piston radiating area Sd = 314,2 cm²
• effective mechanical mass incl. air load mms = 126,12 g
• equivalent volume of compliance Vas = 24,9 l
• total Q factor Qts = 0,49 (Qms=4,2, Qes=0,56)
• voice coil diameter = 38,75 mm
• maximum peak linear excursion vibration x_lin = +/- 7,4 mm
• mounting diameter d = 232 mm
• overall diameter d = 261 mm
• mounting depth (not countersunk) t = 133,8 mm
• mass m = 3,16 kg

PDF data sheet

open a bigger photo

recommended cabinet 1:
closed cabinet with 16 L volume
from 55/35 Hz (-3dB/-8dB)
 
recommended cabinet 2:
57 L volume bass reflex cabinet
with HP70 reflex tube, 19 cm long.
from 28/22 Hz (-3dB/-8dB).

XXLS-P835016 (XXLS-WAL 10/04)       order no. ty-XXLS-P835016       EUR 248,00 excl. VAT: € 208.40 / $ 235.50
25 cm bass driver with aluminium cone.

• power handling (continuous/programme) = 100 W
• frequency range = 25-800 Hz
• resonance frequency fs = 26 Hz
• impedance R = 4 Ohm
• sound pressure level SPL = 89 dB (2,83V; 1m)
• DC resistance Re = 2,46 Ohm
• force factor BL = 10,36 N/A
• voice coil inductance L = 0,51 mH
• effective piston radiating area Sd = 356,3 cm²
• effective mechanical mass incl. air load mms = 102,1 g
• equivalent volume of compliance Vas = 65 l
• total Q factor Qts = 0,37 (Qms=11,27, Qes=0,38)
• voice coil diameter = 51 mm
• maximum peak linear excursion vibration x_lin = +/- 12,3 mm
• mounting diameter d = 239 mm
• overall diameter d = 269,2 mm
• mounting depth (not countersunk) t = 135,1 mm
• mass m = 6,14 kg

PDF data sheet

open a bigger photo

recommended cabinet 1:
closed cabinet with 37 L volume
from 43/27 Hz (-3dB/-8dB)
 
recommended cabinet 2:
140 L volume bass reflex cabinet
with HP100 reflex tube, 26 cm long.
from 22/17 Hz (-3dB/-8dB).

XXLS-P835017 (XXLS-WAL 12/04)       order no. ty-XXLS-P835017       EUR 259,00 excl. VAT: € 217.65 / $ 245.94
29 cm bass driver with aluminium cone.

• power handling (continuous/programme) = 120 W
• frequency range = 20-800 Hz
• resonance frequency fs = 21,6 Hz
• impedance R = 4 Ohm
• sound pressure level SPL = 88,6 dB (2,83V; 1m)
• DC resistance Re = 2,51 Ohm
• force factor BL = 10,58 N/A
• voice coil inductance L = 0,53 mH
• effective piston radiating area Sd = 483,1 cm²
• effective mechanical mass incl. air load mms = 131,4 g
• equivalent volume of compliance Vas = 136 l
• total Q factor Qts = 0,39 (Qms=10,83, Qes=0,4)
• voice coil diameter = 51 mm
• maximum peak linear excursion vibration x_lin = +/- 12,3 mm
• mounting diameter d = 277 mm
• overall diameter d = 307,9 mm
• mounting depth (not countersunk) t = 144 mm
• mass m = 6,4 kg

PDF data sheet

open a bigger photo

recommended cabinet 1:
closed cabinet with 8,6 L volume
from 78/49 Hz (-3dB/-8dB)
 
recommended cabinet 2:
28 L volume bass reflex cabinet
with HP70 reflex tube, 20 cm long.
from 41/32 Hz (-3dB/-8dB).

NE225W-08       order no. ty-NE225W-08       EUR 295,00 excl. VAT: € 247.90 / $ 280.13
21 cm bass driver with paper cone.

• power handling (continuous/programme) = 160 W
• frequency range = 30-15000 Hz
• resonance frequency fs = 32 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 88,6 dB (2,83V; 1m)
• DC resistance Re = 6,32 Ohm
• force factor BL = 11,52 N/A
• voice coil inductance L = 0,21 mH
• effective piston radiating area Sd = 227 cm²
• effective mechanical mass incl. air load mms = 35,9 g
• equivalent volume of compliance Vas = 50,16 l
• total Q factor Qts = 0,33 (Qms=8,84, Qes=0,34)
• voice coil diameter = 51 mm
• maximum peak linear excursion vibration x_lin = +/- 7,7 mm
• mounting diameter d = 187 mm
• overall diameter d = 225 mm
• mounting depth (not countersunk) t = 107 mm
• mass m = 1,84 kg

PDF data sheet

open a bigger photo

recommended cabinet 1:
closed cabinet with 10,8 L volume
from 59/37 Hz (-3dB/-8dB)
 
recommended cabinet 2:
33 L volume bass reflex cabinet
with HP70 reflex tube, 31 cm long.
from 32/25 Hz (-3dB/-8dB).

NE265W-04       order no. ty-NE265W-04       EUR 339,00 excl. VAT: € 284.87 / $ 321.91
25 cm bass driver with paper cone.

• power handling (continuous/programme) = 150 W
• frequency range = 20-800 Hz
• resonance frequency fs = 23 Hz
• impedance R = 4 Ohm
• sound pressure level SPL = 88 dB (2,83V; 1m)
• DC resistance Re = 2,86 Ohm
• force factor BL = 11,74 N/A
• voice coil inductance L = 0,4 mH
• effective piston radiating area Sd = 330,1 cm²
• effective mechanical mass incl. air load mms = 98,2 g
• equivalent volume of compliance Vas = 72,83 l
• total Q factor Qts = 0,29 (Qms=13,77, Qes=0,3)
• voice coil diameter = 51 mm
• maximum peak linear excursion vibration x_lin = +/- 9 mm
• mounting diameter d = 235 mm
• overall diameter d = 265 mm
• mounting depth (not countersunk) t = 125,5 mm
• mass m = 2,24 kg

PDF data sheet

open a bigger photo

recommended cabinet 1:
closed cabinet with 13,4 L volume
from 61/39 Hz (-3dB/-8dB)
 
recommended cabinet 2:
39 L volume bass reflex cabinet
with HP70 reflex tube, 23 cm long.
from 34/26 Hz (-3dB/-8dB).

NE265W-08       order no. ty-NE265W-08       EUR 339,00 excl. VAT: € 284.87 / $ 321.91
25 cm bass driver with paper cone.

• power handling (continuous/programme) = 190 W
• frequency range = 20-800 Hz
• resonance frequency fs = 23 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 85 dB (2,83V; 1m)
• DC resistance Re = 6,24 Ohm
• force factor BL = 14,7 N/A
• voice coil inductance L = 0,53 mH
• effective piston radiating area Sd = 326,9 cm²
• effective mechanical mass incl. air load mms = 74,1 g
• equivalent volume of compliance Vas = 97,21 l
• total Q factor Qts = 0,3 (Qms=10,33, Qes=0,31)
• voice coil diameter = 51 mm
• maximum peak linear excursion vibration x_lin = +/- 9,4 mm
• mounting diameter d = 235 mm
• overall diameter d = 265 mm
• mounting depth (not countersunk) t = 125,5 mm
• mass m = 2,27 kg

PDF data sheet

open a bigger photo

recommended cabinet 1:
closed cabinet with 35 L volume
from 48/31 Hz (-3dB/-8dB)
 
recommended cabinet 2:
111 L volume bass reflex cabinet
with HP100 reflex tube, 27 cm long.
from 26/20 Hz (-3dB/-8dB).

NE315W-04       order no. ty-NE315W-04       EUR 390,00 excl. VAT: € 327.73 / $ 370.34
30 cm bass driver with paper cone.

• power handling (continuous/programme) = 150 W
• frequency range = 20-800 Hz
• resonance frequency fs = 20 Hz
• impedance R = 4 Ohm
• sound pressure level SPL = 88,6 dB (2,83V; 1m)
• DC resistance Re = 2,78 Ohm
• force factor BL = 11,12 N/A
• voice coil inductance L = 0,38 mH
• effective piston radiating area Sd = 506,7 cm²
• effective mechanical mass incl. air load mms = 113,9 g
• equivalent volume of compliance Vas = 201,66 l
• total Q factor Qts = 0,31 (Qms=15,6, Qes=0,32)
• voice coil diameter = 51 mm
• maximum peak linear excursion vibration x_lin = +/- 9 mm
• mounting diameter d = 288 mm
• overall diameter d = 315 mm
• mounting depth (not countersunk) t = 142,5 mm
• mass m = 2,68 kg

PDF data sheet

open a bigger photo

recommended cabinet 1:
closed cabinet with 10,3 L volume
from 65/41 Hz (-3dB/-8dB)
 
recommended cabinet 2:
42 L volume bass reflex cabinet
with HP70 reflex tube, 18 cm long.
from 31/26 Hz (-3dB/-8dB).

GBS-250F38CP01-04       order no. ty-GBS-250F38CP01-04       EUR 149,00 excl. VAT: € 125.21 / $ 141.49
25 cm bass driver with high quality cone.

• power handling (continuous/programme) = 200 W
• frequency range = 35-200 Hz
• resonance frequency fs = 38 Hz
• impedance R = 4 Ohm
• sound pressure level SPL = 88 dB (2,83V; 1m)
• DC resistance Re = 3,45 Ohm
• force factor BL = 13,11 N/A
• voice coil inductance L = 3,45 mH
• effective piston radiating area Sd = 314,2 cm²
• effective mechanical mass incl. air load mms = 103,4 g
• equivalent volume of compliance Vas = 23,92 l
• total Q factor Qts = 0,45 (Qms=5,62, Qes=0,49)
• voice coil diameter = 39 mm
• maximum peak linear excursion vibration x_lin = +/- 6 mm
• mounting diameter d = 228 mm
• overall diameter d = 264 mm
• mounting depth (not countersunk) t = 40,3 mm
• mass m = 3,24 kg

PDF data sheet

Vifa XT 300 VS/4 (Paarweise selektiert)       order no. A-XT300VS-4sel       EUR 248,00 excl. VAT: € 208.40 / $ 235.50
25 mm tweeter with high quality cone. A pair of speakers is delivered (the price is for one pair). The driver is magnetically shielded. The magnet system is based on Neodymium technology. The speaker has a 5 mm solid metal front plate.

• power handling (continuous/programme) = 140/400 W
• frequency range = 1500-40000 Hz
• resonance frequency fs = 500 Hz
• impedance R = 4 Ohm
• sound pressure level SPL = 87,5 dB (2,83V; 1m)
• DC resistance Re = 3 Ohm
• force factor BL = 2,2 N/A
• effective piston radiating area Sd = 6 cm²
• effective mechanical mass incl. air load mms = 0,3 g
• total Q factor Qts = 0,38 (Qms=2,5, Qes=0,45)
• voice coil diameter = 25 mm
• maximum peak linear excursion vibration x_lin = +/- 0,5 mm
• mounting diameter d = 72 mm
• overall diameter d = 104,2 mm
• mounting depth (not countersunk) t = 51 mm
• mass m = 0,8 kg

PDF data sheet

open a bigger photo

H26TG-35-06       order no. ty-H26TG-35-06       - not available
25 mm tweeter with fabric cone. Voice coil windings immersed in magnetic fluid increase short term power handling capacity.

• power handling (continuous/programme) = 100 W
• frequency range = 2500-20000 Hz
• resonance frequency fs = 832 Hz
• impedance R = 6 Ohm
• sound pressure level SPL = 95 dB (2,83V; 1m)
• DC resistance Re = 3,9 Ohm
• force factor BL = 2,88 N/A
• voice coil inductance L = 0,03 mH
• effective piston radiating area Sd = 7,1 cm²
• effective mechanical mass incl. air load mms = 0,21 g
• total Q factor Qts = 0,28 (Qms=0,6, Qes=0,51)
• voice coil diameter = 25 mm
• maximum peak linear excursion vibration x_lin = +/- 0,45 mm
• mounting diameter d = 72 mm
• overall diameter d = 104 mm
• mounting depth (not countersunk) t = 56,3 mm
• mass m = 0,52 kg

PDF data sheet

NDT-53       order no. not-available       - not available
26 mm tweeter with high quality cone.

• power handling (continuous/programme) = 80/100 W
• frequency range = > 3000 Hz
• resonance frequency fs = 1330 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 90 dB (2,83V; 1m)
• DC resistance Re = 5,5 Ohm
• force factor BL = 2 N/A
• voice coil inductance L = 0,1 mH
• effective piston radiating area Sd = 6,2 cm²
• effective mechanical mass incl. air load mms = 0,3 g
• total Q factor Qts = 1,55 (Qms=2,7, Qes=3,66)
• voice coil diameter = 26 mm
• mounting diameter d = 48 mm
• overall diameter d = 52,8 mm
• mounting depth (not countersunk) t = 15 mm

PH-25/8       order no. not-available       - not available
26 mm tweeter with high quality cone.

• power handling (continuous/programme) = 70/90 W
• frequency range = > 3000 Hz
• resonance frequency fs = 1075 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 89 dB (2,83V; 1m)
• DC resistance Re = 6,9 Ohm
• force factor BL = 1,8 N/A
• voice coil inductance L = 0,1 mH
• effective piston radiating area Sd = 6,2 cm²
• effective mechanical mass incl. air load mms = 0,26 g
• total Q factor Qts = 2,21 (Qms=6,18, Qes=3,45)
• voice coil diameter = 26 mm
• mounting diameter d = 62 mm
• overall diameter d = 80 mm
• mounting depth (not countersunk) t = 19,5 mm

KO-10/8       order no. not-available       - not available
26 mm tweeter with high quality cone.

• power handling (continuous/programme) = 70/90 W
• frequency range = > 2500 Hz
• resonance frequency fs = 1056 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 91,5 dB (2,83V; 1m)
• DC resistance Re = 6,8 Ohm
• force factor BL = 3,1 N/A
• voice coil inductance L = 0,1 mH
• effective piston radiating area Sd = 6,2 cm²
• effective mechanical mass incl. air load mms = 0,24 g
• total Q factor Qts = 0,89 (Qms=4,16, Qes=1,13)
• voice coil diameter = 26 mm
• mounting diameter d = 72 mm
• overall diameter d = 114,5 mm
• mounting depth (not countersunk) t = 22,3 mm

WA-10/8       order no. not-available       - not available
26 mm tweeter with fabric cone.

• power handling (continuous/programme) = 100/120 W
• frequency range = > 2500 Hz
• resonance frequency fs = 860 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 93 dB (2,83V; 1m)
• DC resistance Re = 5,5 Ohm
• force factor BL = 3,5 N/A
• voice coil inductance L = 0,1 mH
• effective piston radiating area Sd = 6,2 cm²
• effective mechanical mass incl. air load mms = 0,33 g
• total Q factor Qts = 0,77 (Qms=4,31, Qes=0,94)
• voice coil diameter = 26 mm
• mounting diameter d = 79 mm
• overall diameter d = 100 mm
• mounting depth (not countersunk) t = 27,5 mm

SR-10       order no. not-available       - not available
26 mm tweeter with fabric cone.

• power handling (continuous/programme) = 80/120 W
• frequency range = > 2500 Hz
• resonance frequency fs = 1006 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 92 dB (2,83V; 1m)
• DC resistance Re = 7 Ohm
• force factor BL = 3,3 N/A
• voice coil inductance L = 0,1 mH
• effective piston radiating area Sd = 6,2 cm²
• effective mechanical mass incl. air load mms = 0,33 g
• total Q factor Qts = 0,96 (Qms=4,72, Qes=1,21)
• voice coil diameter = 26 mm
• mounting diameter d = 79 mm
• overall diameter d = 100 mm
• mounting depth (not countersunk) t = 27,5 mm

PHH-25/8       order no. not-available       - not available
26 mm tweeter with high quality cone.

• power handling (continuous/programme) = 80/120 W
• frequency range = > 3000 Hz
• resonance frequency fs = 1040 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 99 dB (2,83V; 1m)
• DC resistance Re = 6,8 Ohm
• force factor BL = 3,3 N/A
• voice coil inductance L = 0,1 mH
• effective piston radiating area Sd = 6,2 cm²
• effective mechanical mass incl. air load mms = 0,33 g
• total Q factor Qts = 0,87 (Qms=5,16, Qes=1,04)
• voice coil diameter = 26 mm
• mounting diameter d = 80 mm
• overall diameter d = 100 mm
• mounting depth (not countersunk) t = 76,5 mm

recommended cabinet 1:
closed cabinet with 0,76 L volume
from 145/92 Hz (-3dB/-8dB)
 
recommended cabinet 2:
3 L volume bass reflex cabinet
with HP35 reflex tube, 13 cm long.
from 70/57 Hz (-3dB/-8dB).

HDS Exclusive 106 (830881)       order no. not-available       - not available
11 cm midrange driver with high quality cone.

• frequency range = 90-4000 Hz
• resonance frequency fs = 81,2 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 84 dB (2,83V; 1m)
• DC resistance Re = 5,9 Ohm
• force factor BL = 6,4 N/A
• voice coil inductance L = 1 mH
• effective piston radiating area Sd = 53 cm²
• effective mechanical mass incl. air load mms = 7,4 g
• equivalent volume of compliance Vas = 2 l
• total Q factor Qts = 0,44 (Qms=2,31, Qes=0,55)
• voice coil diameter = 26 mm
• maximum peak linear excursion vibration x_lin = +/- 3,5 mm
• mounting diameter d = 95 mm
• overall diameter d = 120,8 mm
• mounting depth (not countersunk) t = 56,5 mm

PDF data sheet

recommended cabinet 1:
closed cabinet with 1,1 L volume
from 139/87 Hz (-3dB/-8dB)
 
recommended cabinet 2:
4,4 L volume bass reflex cabinet
with HP35 reflex tube, 9 cm long.
from 67/55 Hz (-3dB/-8dB).

CSC-116G       order no. not-available       - not available
10 cm bass driver with sandwich cone.

• power handling (continuous/programme) = 50/80 W
• frequency range = 60-5000 Hz
• resonance frequency fs = 74 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 86,7 dB (2,83V; 1m)
• DC resistance Re = 5,6 Ohm
• force factor BL = 5,6 N/A
• voice coil inductance L = 0,9 mH
• effective piston radiating area Sd = 58 cm²
• effective mechanical mass incl. air load mms = 6,2 g
• equivalent volume of compliance Vas = 3,4 l
• total Q factor Qts = 0,43 (Qms=2,4, Qes=0,52)
• voice coil diameter = 26 mm
• maximum peak linear excursion vibration x_lin = +/- 1,5 mm
• mounting diameter d = 93 mm
• overall diameter d = 116 mm
• mounting depth (not countersunk) t = 53,5 mm

recommended cabinet 1:
closed cabinet with 1,4 L volume
from 130/82 Hz (-3dB/-8dB)
 
recommended cabinet 2:
5,6 L volume bass reflex cabinet
with HP35 reflex tube, 8 cm long.
from 61/51 Hz (-3dB/-8dB).

HDS 106 PPB shielded (830854)       order no. not-available       - not available
11 cm midrange driver with polypropylene cone.

• frequency range = 80-4500 Hz
• resonance frequency fs = 75,7 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 86,8 dB (2,83V; 1m)
• DC resistance Re = 5,3 Ohm
• force factor BL = 5,1 N/A
• voice coil inductance L = 0,6 mH
• effective piston radiating area Sd = 55 cm²
• effective mechanical mass incl. air load mms = 5,9 g
• equivalent volume of compliance Vas = 3,2 l
• total Q factor Qts = 0,46 (Qms=2,66, Qes=0,56)
• voice coil diameter = 26 mm
• maximum peak linear excursion vibration x_lin = +/- 3 mm
• mounting diameter d = 95 mm
• overall diameter d = 120,8 mm
• mounting depth (not countersunk) t = 71 mm

recommended cabinet 1:
closed cabinet with 2 L volume
from 133/84 Hz (-3dB/-8dB)
 
recommended cabinet 2:
7,5 L volume bass reflex cabinet
with HP50 reflex tube, 12 cm long.
from 66/53 Hz (-3dB/-8dB).

PT 145 TV       order no. not-available       - not available
13 cm bass driver with polypropylene cone.

• power handling (continuous/programme) = 80/100 W
• frequency range = 60-4000 Hz
• resonance frequency fs = 68 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 88,5 dB (2,83V; 1m)
• DC resistance Re = 6,1 Ohm
• force factor BL = 6,3 N/A
• voice coil inductance L = 1,1 mH
• effective piston radiating area Sd = 85 cm²
• effective mechanical mass incl. air load mms = 7,9 g
• equivalent volume of compliance Vas = 6,7 l
• total Q factor Qts = 0,41 (Qms=1,9, Qes=0,52)
• voice coil diameter = 26 mm
• maximum peak linear excursion vibration x_lin = +/- 2 mm
• mounting diameter d = 115 mm
• overall diameter d = 145 mm
• mounting depth (not countersunk) t = 73 mm

recommended cabinet 1:
closed cabinet with 1,9 L volume
from 133/84 Hz (-3dB/-8dB)
 
recommended cabinet 2:
6,8 L volume bass reflex cabinet
with HP50 reflex tube, 14 cm long.
from 67/53 Hz (-3dB/-8dB).

HDS Exclusive 152 (830882)       order no. not-available       - not available
14 cm midrange driver with high quality cone.

• frequency range = 60-2500 Hz
• resonance frequency fs = 64,5 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 88,2 dB (2,83V; 1m)
• DC resistance Re = 5,9 Ohm
• force factor BL = 7 N/A
• voice coil inductance L = 0,8 mH
• effective piston radiating area Sd = 87 cm²
• effective mechanical mass incl. air load mms = 8,8 g
• equivalent volume of compliance Vas = 7,2 l
• total Q factor Qts = 0,39 (Qms=3,85, Qes=0,43)
• voice coil diameter = 26 mm
• maximum peak linear excursion vibration x_lin = +/- 3,5 mm
• mounting diameter d = 120,3 mm
• overall diameter d = 152,3 mm
• mounting depth (not countersunk) t = 65,5 mm

PDF data sheet

open a bigger photo

recommended cabinet 1:
closed cabinet with 1,9 L volume
from 133/84 Hz (-3dB/-8dB)
 
recommended cabinet 2:
6,8 L volume bass reflex cabinet
with HP50 reflex tube, 14 cm long.
from 67/53 Hz (-3dB/-8dB).

HDS E 5-25/08 (831882)       order no. not-available       - not available
14 cm midrange driver with paper cone.

• frequency range = 50-6000 Hz
• resonance frequency fs = 64,5 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 88,2 dB (2,83V; 1m)
• DC resistance Re = 5,9 Ohm
• force factor BL = 7 N/A
• voice coil inductance L = 0,8 mH
• effective piston radiating area Sd = 87 cm²
• effective mechanical mass incl. air load mms = 8,8 g
• equivalent volume of compliance Vas = 7,2 l
• total Q factor Qts = 0,39 (Qms=3,85, Qes=0,43)
• voice coil diameter = 26 mm
• maximum peak linear excursion vibration x_lin = +/- 3,5 mm
• mounting diameter d = 120,3 mm
• overall diameter d = 152,3 mm
• mounting depth (not countersunk) t = 61,3 mm

PDF data sheet

recommended cabinet 1:
closed cabinet with 1,4 L volume
from 139/88 Hz (-3dB/-8dB)
 
recommended cabinet 2:
4,6 L volume bass reflex cabinet
with HP50 reflex tube, 20 cm long.
from 73/57 Hz (-3dB/-8dB).

HDS-134       order no. not-available       - not available
14 cm bass driver with high quality cone.

• power handling (continuous/programme) = 100/140 W
• frequency range = xxx-3000 Hz
• resonance frequency fs = 59 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 89 dB (2,83V; 1m)
• DC resistance Re = 5,7 Ohm
• force factor BL = 7,4 N/A
• voice coil inductance L = 0,4 mH
• effective piston radiating area Sd = 91 cm²
• effective mechanical mass incl. air load mms = 10,8 g
• equivalent volume of compliance Vas = 7,6 l
• total Q factor Qts = 0,34 (Qms=2,07, Qes=0,41)
• voice coil diameter = 26 mm
• maximum peak linear excursion vibration x_lin = +/- 4 mm
• mounting diameter d = 120 mm
• overall diameter d = 152 mm
• mounting depth (not countersunk) t = 60 mm

recommended cabinet 1:
closed cabinet with 2,2 L volume
from 146/92 Hz (-3dB/-8dB)
 
recommended cabinet 2:
8,5 L volume bass reflex cabinet
with HP70 reflex tube, 17 cm long.
from 71/58 Hz (-3dB/-8dB).

Sub176SD       order no. not-available       - not available
16 cm bass driver with high quality cone.

• power handling (continuous/programme) = 100/140 W
• frequency range = 60-3000 Hz
• resonance frequency fs = 76 Hz
• impedance R = 4 Ohm
• sound pressure level SPL = 88 dB (2,83V; 1m)
• DC resistance Re = 3,5 Ohm
• force factor BL = 6,8 N/A
• voice coil inductance L = 0,6 mH
• effective piston radiating area Sd = 143 cm²
• effective mechanical mass incl. air load mms = 17,6 g
• equivalent volume of compliance Vas = 7,1 l
• total Q factor Qts = 0,42 (Qms=0,64, Qes=1,26)
• voice coil diameter = 33 mm
• maximum peak linear excursion vibration x_lin = +/- 5 mm
• mounting diameter d = 142 mm
• overall diameter d = 176 mm
• mounting depth (not countersunk) t = 81 mm

open a bigger photo

recommended cabinet 1:
closed cabinet with 3,9 L volume
from 100/63 Hz (-3dB/-8dB)
 
recommended cabinet 2:
13,6 L volume bass reflex cabinet
with HP50 reflex tube, 12 cm long.
from 52/41 Hz (-3dB/-8dB).

HDS-182       order no. not-available       - not available
17 cm bass driver with high quality cone.

• power handling (continuous/programme) = 150/200 W
• frequency range = < 3000 Hz
• resonance frequency fs = 44,9 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 87,6 dB (2,83V; 1m)
• DC resistance Re = 6,2 Ohm
• force factor BL = 8,9 N/A
• voice coil inductance L = 1,3 mH
• effective piston radiating area Sd = 143 cm²
• effective mechanical mass incl. air load mms = 18,9 g
• equivalent volume of compliance Vas = 18,7 l
• total Q factor Qts = 0,35 (Qms=2,28, Qes=0,42)
• voice coil diameter = 33 mm
• maximum peak linear excursion vibration x_lin = +/- 5,5 mm
• mounting diameter d = 145 mm
• overall diameter d = 183 mm
• mounting depth (not countersunk) t = 78 mm

recommended cabinet 1:
closed cabinet with 9,3 L volume
from 71/45 Hz (-3dB/-8dB)
 
recommended cabinet 2:
36 L volume bass reflex cabinet
with HP70 reflex tube, 17 cm long.
from 35/28 Hz (-3dB/-8dB).

CSX-176T       order no. not-available       - not available
16 cm bass driver with sandwich cone.

• power handling (continuous/programme) = 80/120 W
• frequency range = 35-3000 Hz
• resonance frequency fs = 38 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 86,5 dB (2,83V; 1m)
• DC resistance Re = 6,1 Ohm
• force factor BL = 7 N/A
• voice coil inductance L = 1,3 mH
• effective piston radiating area Sd = 143 cm²
• effective mechanical mass incl. air load mms = 17,8 g
• equivalent volume of compliance Vas = 28 l
• total Q factor Qts = 0,43 (Qms=2,22, Qes=0,53)
• voice coil diameter = 33 mm
• maximum peak linear excursion vibration x_lin = +/- 5,5 mm
• mounting diameter d = 142 mm
• overall diameter d = 176 mm
• mounting depth (not countersunk) t = 77 mm

recommended cabinet 1:
closed cabinet with 4,3 L volume
from 91/58 Hz (-3dB/-8dB)
 
recommended cabinet 2:
16 L volume bass reflex cabinet
with HP50 reflex tube, 12 cm long.
from 46/37 Hz (-3dB/-8dB).

HDS-182PP       order no. not-available       - not available
17 cm bass driver with high quality cone.

• power handling (continuous/programme) = 150/200 W
• frequency range = xxx-3000 Hz
• resonance frequency fs = 44,3 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 86,3 dB (2,83V; 1m)
• DC resistance Re = 6,3 Ohm
• force factor BL = 8,5 N/A
• voice coil inductance L = 1,4 mH
• effective piston radiating area Sd = 134 cm²
• effective mechanical mass incl. air load mms = 19,3 g
• equivalent volume of compliance Vas = 16,6 l
• total Q factor Qts = 0,39 (Qms=2,33, Qes=0,47)
• voice coil diameter = 33 mm
• maximum peak linear excursion vibration x_lin = +/- 5,5 mm
• mounting diameter d = 145 mm
• overall diameter d = 183 mm
• mounting depth (not countersunk) t = 78 mm

recommended cabinet 1:
closed cabinet with 4,9 L volume
from 96/60 Hz (-3dB/-8dB)
 
recommended cabinet 2:
19 L volume bass reflex cabinet
with HP70 reflex tube, 18 cm long.
from 47/38 Hz (-3dB/-8dB).

HDS-182 TV       order no. not-available       - not available
17 cm bass driver with high quality cone.

• power handling (continuous/programme) = 150/200 W
• frequency range = xxx-2500 Hz
• resonance frequency fs = 50 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 87 dB (2,83V; 1m)
• DC resistance Re = 6,3 Ohm
• force factor BL = 8,4 N/A
• voice coil inductance L = 1,2 mH
• effective piston radiating area Sd = 143 cm²
• effective mechanical mass incl. air load mms = 18,2 g
• equivalent volume of compliance Vas = 15,7 l
• total Q factor Qts = 0,42 (Qms=2,3, Qes=0,51)
• voice coil diameter = 33 mm
• maximum peak linear excursion vibration x_lin = +/- 5,5 mm
• mounting diameter d = 145 mm
• overall diameter d = 183 mm
• mounting depth (not countersunk) t = 78 mm

recommended cabinet 1:
closed cabinet with 17 L volume
from 65/41 Hz (-3dB/-8dB)
 
recommended cabinet 2:
65 L volume bass reflex cabinet
with HP100 reflex tube, 25 cm long.
from 32/26 Hz (-3dB/-8dB).

HDS 205 PPB (830868)       order no. not-available       - not available
21 cm bass driver with polypropylene cone.

• frequency range = 35-1800 Hz
• resonance frequency fs = 32,5 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 90,1 dB (2,83V; 1m)
• DC resistance Re = 5,5 Ohm
• force factor BL = 8,1 N/A
• voice coil inductance L = 1,5 mH
• effective piston radiating area Sd = 221 cm²
• effective mechanical mass incl. air load mms = 25,6 g
• equivalent volume of compliance Vas = 63,4 l
• total Q factor Qts = 0,4 (Qms=4,09, Qes=0,44)
• voice coil diameter = 33 mm
• maximum peak linear excursion vibration x_lin = +/- 5,5 mm
• mounting diameter d = 190 mm
• overall diameter d = 225,2 mm
• mounting depth (not countersunk) t = 94 mm

PDF data sheet

recommended cabinet 1:
closed cabinet with 18 L volume
from 67/42 Hz (-3dB/-8dB)
 
recommended cabinet 2:
65 L volume bass reflex cabinet
with HP100 reflex tube, 23 cm long.
from 33/27 Hz (-3dB/-8dB).

HDS Exclusive 205 (830884)       order no. not-available       - not available
21 cm bass driver with high quality cone.

• frequency range = 40-2000 Hz
• resonance frequency fs = 32,4 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 89,3 dB (2,83V; 1m)
• DC resistance Re = 5,8 Ohm
• force factor BL = 8 N/A
• voice coil inductance L = 1,4 mH
• effective piston radiating area Sd = 221 cm²
• effective mechanical mass incl. air load mms = 23,7 g
• equivalent volume of compliance Vas = 68,8 l
• total Q factor Qts = 0,38 (Qms=3, Qes=0,44)
• voice coil diameter = 33 mm
• maximum peak linear excursion vibration x_lin = +/- 5,5 mm
• mounting diameter d = 190 mm
• overall diameter d = 225,2 mm
• mounting depth (not countersunk) t = 94 mm

PDF data sheet

recommended cabinet 1:
closed cabinet with 8,7 L volume
from 82/52 Hz (-3dB/-8dB)
 
recommended cabinet 2:
23 L volume bass reflex cabinet
with HP70 reflex tube, 22 cm long.
from 48/36 Hz (-3dB/-8dB).

CSX-217T       order no. not-available       - not available
20 cm bass driver with sandwich cone.

• power handling (continuous/programme) = 100/140 W
• frequency range = 30-1500 Hz
• resonance frequency fs = 28 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 89,5 dB (2,83V; 1m)
• DC resistance Re = 5,9 Ohm
• force factor BL = 10,4 N/A
• voice coil inductance L = 2,6 mH
• effective piston radiating area Sd = 235 cm²
• effective mechanical mass incl. air load mms = 30,5 g
• equivalent volume of compliance Vas = 80 l
• total Q factor Qts = 0,27 (Qms=3,5, Qes=0,29)
• voice coil diameter = 33 mm
• maximum peak linear excursion vibration x_lin = +/- 4 mm
• mounting diameter d = 184 mm
• overall diameter d = 217 mm
• mounting depth (not countersunk) t = 91 mm

recommended cabinet 1:
closed cabinet with 18 L volume
from 49/31 Hz (-3dB/-8dB)
 
recommended cabinet 2:
66 L volume bass reflex cabinet
with HP70 reflex tube, 20 cm long.
from 25/20 Hz (-3dB/-8dB).

CCS-220/8       order no. not-available       - not available
20 cm bass driver with polypropylene cone.

• power handling (continuous/programme) = 100/140 W
• frequency range = 25-600 Hz
• resonance frequency fs = 24 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 90 dB (2,83V; 1m)
• DC resistance Re = 8+8 Ohm
• force factor BL = 8,1 N/A
• voice coil inductance L = 1,4 mH
• effective piston radiating area Sd = 225 cm²
• effective mechanical mass incl. air load mms = 47,6 g
• equivalent volume of compliance Vas = 70 l
• total Q factor Qts = 0,38 (Qms=3,66, Qes=0,43)
• voice coil diameter = 39 mm
• maximum peak linear excursion vibration x_lin = +/- 7,5 mm
• mounting diameter d = 184 mm
• overall diameter d = 220,5 mm
• mounting depth (not countersunk) t = 97 mm

recommended cabinet 1:
closed cabinet with 70 L volume
from 41/26 Hz (-3dB/-8dB)
 
recommended cabinet 2:
270 L volume bass reflex cabinet
with HP100 reflex tube, 12 cm long.
from 18/16 Hz (-3dB/-8dB).

CSC-217R       order no. not-available       - not available
20 cm bass driver with sandwich cone.

• power handling (continuous/programme) = 90/120 W
• frequency range = 35-2000 Hz
• resonance frequency fs = 30 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 87 dB (2,83V; 1m)
• DC resistance Re = 5,7 Ohm
• force factor BL = 6,7 N/A
• voice coil inductance L = 2 mH
• effective piston radiating area Sd = 235 cm²
• effective mechanical mass incl. air load mms = 28,9 g
• equivalent volume of compliance Vas = 74 l
• total Q factor Qts = 0,58 (Qms=4,16, Qes=0,68)
• voice coil diameter = 33 mm
• maximum peak linear excursion vibration x_lin = +/- 5,5 mm
• mounting diameter d = 184 mm
• overall diameter d = 217 mm
• mounting depth (not countersunk) t = 91 mm

recommended cabinet 1:
closed cabinet with 20 L volume
from 70/44 Hz (-3dB/-8dB)
 
recommended cabinet 2:
70 L volume bass reflex cabinet
with HP100 reflex tube, 19 cm long.
from 35/28 Hz (-3dB/-8dB).

PT 210M/8       order no. not-available       - not available
20 cm bass driver with high quality cone.

• power handling (continuous/programme) = 90/130 W
• frequency range = 35-2000 Hz
• resonance frequency fs = 33 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 89,7 dB (2,83V; 1m)
• DC resistance Re = 6,1 Ohm
• force factor BL = 7,7 N/A
• voice coil inductance L = 1,6 mH
• effective piston radiating area Sd = 225 cm²
• effective mechanical mass incl. air load mms = 21,1 g
• equivalent volume of compliance Vas = 81 l
• total Q factor Qts = 0,38 (Qms=2,29, Qes=0,45)
• voice coil diameter = 33 mm
• maximum peak linear excursion vibration x_lin = +/- 4 mm
• mounting diameter d = 184,5 mm
• overall diameter d = 210,5 mm
• mounting depth (not countersunk) t = 87 mm

recommended cabinet 1:
closed cabinet with 7,3 L volume
from 88/56 Hz (-3dB/-8dB)
 
recommended cabinet 2:
19 L volume bass reflex cabinet
with HP70 reflex tube, 23 cm long.
from 51/39 Hz (-3dB/-8dB).

HDS-205       order no. not-available       - not available
21 cm bass driver with high quality cone.

• power handling (continuous/programme) = 180/220 W
• frequency range = xxx-1000 Hz
• resonance frequency fs = 30 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 91 dB (2,83V; 1m)
• DC resistance Re = 5,7 Ohm
• force factor BL = 9,9 N/A
• voice coil inductance L = 1,8 mH
• effective piston radiating area Sd = 220 cm²
• effective mechanical mass incl. air load mms = 28 g
• equivalent volume of compliance Vas = 67 l
• total Q factor Qts = 0,27 (Qms=3,02, Qes=0,3)
• voice coil diameter = 33 mm
• maximum peak linear excursion vibration x_lin = +/- 5,5 mm
• mounting diameter d = 190 mm
• overall diameter d = 225 mm
• mounting depth (not countersunk) t = 90 mm

recommended cabinet 1:
closed cabinet with 28 L volume
from 64/40 Hz (-3dB/-8dB)
 
recommended cabinet 2:
96 L volume bass reflex cabinet
with HP100 reflex tube, 16 cm long.
from 33/26 Hz (-3dB/-8dB).

CSX-257W       order no. not-available       - not available
24 cm bass driver with sandwich cone.

• power handling (continuous/programme) = 120/160 W
• frequency range = 25-800 Hz
• resonance frequency fs = 28 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 88,2 dB (2,83V; 1m)
• DC resistance Re = 5,5 Ohm
• force factor BL = 10 N/A
• voice coil inductance L = 2,9 mH
• effective piston radiating area Sd = 330 cm²
• effective mechanical mass incl. air load mms = 51,9 g
• equivalent volume of compliance Vas = 144 l
• total Q factor Qts = 0,35 (Qms=2,56, Qes=0,4)
• voice coil diameter = 39 mm
• maximum peak linear excursion vibration x_lin = +/- 9 mm
• mounting diameter d = 220 mm
• overall diameter d = 257 mm
• mounting depth (not countersunk) t = 99,6 mm

recommended cabinet 1:
closed cabinet with 33 L volume
from 45/28 Hz (-3dB/-8dB)
 
recommended cabinet 2:
131 L volume bass reflex cabinet
with HP100 reflex tube, 26 cm long.
from 21/18 Hz (-3dB/-8dB).

CC-260       order no. not-available       - not available
24 cm bass driver with polypropylene cone.

• power handling (continuous/programme) = 100/140 W
• frequency range = 55-3000 Hz
• resonance frequency fs = 25 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 87 dB (2,83V; 1m)
• DC resistance Re = 5,4 Ohm
• force factor BL = 10 N/A
• voice coil inductance L = 3,3 mH
• effective piston radiating area Sd = 310 cm²
• effective mechanical mass incl. air load mms = 50,8 g
• equivalent volume of compliance Vas = 87 l
• total Q factor Qts = 0,45 (Qms=2,65, Qes=0,54)
• voice coil diameter = 39 mm
• maximum peak linear excursion vibration x_lin = +/- 9 mm
• mounting diameter d = 221 mm
• overall diameter d = 260,5 mm
• mounting depth (not countersunk) t = 103 mm

recommended cabinet 1:
closed cabinet with 3 L volume
from 87/55 Hz (-3dB/-8dB)
 
recommended cabinet 2:
4,4 L volume bass reflex cabinet
with HP70 reflex tube, 124 cm long.
from 64/47 Hz (-3dB/-8dB).

XLS-10       order no. not-available       - not available
25 cm bass driver with high quality cone.

• power handling (continuous/programme) = 250/400 W
• frequency range = < 100 Hz
• resonance frequency fs = 18 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 88,4 dB (2,83V; 1m)
• DC resistance Re = 5,4 Ohm
• force factor BL = 17,5 N/A
• voice coil inductance L = 4,3 mH
• effective piston radiating area Sd = 333 cm²
• effective mechanical mass incl. air load mms = 135 g
• equivalent volume of compliance Vas = 80 l
• total Q factor Qts = 0,17 (Qms=2,63, Qes=0,18)
• voice coil diameter = 51 mm
• maximum peak linear excursion vibration x_lin = +/- 12,5 mm
• mounting diameter d = 240 mm
• overall diameter d = 269,3 mm
• mounting depth (not countersunk) t = 118,2 mm

recommended cabinet 1:
closed cabinet with 7,9 L volume
from 71/45 Hz (-3dB/-8dB)
 
recommended cabinet 2:
15 L volume bass reflex cabinet
with HP100 reflex tube, 117 cm long.
from 46/34 Hz (-3dB/-8dB).

XLS-12       order no. not-available       - not available
29 cm bass driver with high quality cone.

• power handling (continuous/programme) = 250/400 W
• frequency range = < 150 Hz
• resonance frequency fs = 18 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 90 dB (2,83V; 1m)
• DC resistance Re = 3,5 Ohm
• force factor BL = 8,9 N/A
• voice coil inductance L = 1,3 mH
• effective piston radiating area Sd = 462 cm²
• effective mechanical mass incl. air load mms = 166,3 g
• equivalent volume of compliance Vas = 136 l
• total Q factor Qts = 0,2 (Qms=3,7, Qes=0,21)
• voice coil diameter = 51 mm
• maximum peak linear excursion vibration x_lin = +/- 12,5 mm
• mounting diameter d = 278 mm
• overall diameter d = 308 mm
• mounting depth (not countersunk) t = 126 mm

recommended cabinet 1:
closed cabinet with 75 L volume
from 44/28 Hz (-3dB/-8dB)
 
recommended cabinet 2:
294 L volume bass reflex cabinet
with 2x HP100 reflex tube, 19 cm long.
from 21/17 Hz (-3dB/-8dB).

CCX-315/8       order no. not-available       - not available
30 cm bass driver with polypropylene cone.

• power handling (continuous/programme) = 160/200 W
• frequency range = 25-500 Hz
• resonance frequency fs = 24 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 89,3 dB (2,83V; 1m)
• DC resistance Re = 5,5 Ohm
• force factor BL = 11,6 N/A
• voice coil inductance L = 2,8 mH
• effective piston radiating area Sd = 520 cm²
• effective mechanical mass incl. air load mms = 80,2 g
• equivalent volume of compliance Vas = 210 l
• total Q factor Qts = 0,43 (Qms=3,72, Qes=0,49)
• voice coil diameter = 39 mm
• maximum peak linear excursion vibration x_lin = +/- 9 mm
• mounting diameter d = 280 mm
• overall diameter d = 315 mm
• mounting depth (not countersunk) t = 112 mm

SDS 3.5 Zoll Passive Radiator 830878       order no. not-available       - not available
. The diaphragm is varnished with a hydrophabic coat.

• maximum peak linear excursion vibration x_lin = +/- 5 mm
• mounting diameter d = 93 mm
• overall diameter d = 124 mm
• mounting depth (not countersunk) t = 29,4 mm

PDF data sheet