Microphone stands


LD Systems LDMICSET1 - Microphone SET - Microphone, stand, XLR cable and cable clip

Enlarge Bundle containing essential singer equipment:
  • Stage-ready microphone with fitting gig bag
  • Sturdy microphone stand with cable clip
  • XLR microphone cable, 5 m

A handheld dynamic microphone - made for the stage:

  • Sturdy dynamic hypercardioid microphone
  • Sturdy headgrille
  • High feedback resistance
  • Lockable siwtch
  • Wide frequency spectrum
  • Type: Dynamic
  • Pattern: Hyper Cardioid
  • Frequency response: 60 Hz - 15000 Hz
  • Sensitivity (dBV/pa): - 53 dB + / - 3 dB (0 dB = 1 V / Pa at 1 kHz)
  • Rated Impedance:<600 ohms
  • Max. SPL: 144 dB
  • Connector: 3-Pin XLR
  • Accessories: gig bag (leather) and microphone clip included
  • Dimension: 50 mm x 165 mm

Black microphone stand with pivoting arm:

    Heavy duty steel base with folding legs Height: 100 - 160 cm Boom arm length: 70 cm

XLR microphone cable male/female, 5 meter

PDF data sheet Data sheet (in five languages)

price per piece   (Order No ah-LDMICSET1) EUR 47,00 excl. VAT: € 39.50 / $ 46.61
 


Microphone stand M19900B, black

  • Extremely compact microphone stand
  • Three-piece shaft
  • Non-marring height-adjustment system
  • Lightweight plastic base with folding legs
  • Weight: 1.5 kg
  • H: 625/1480 mm

price per piece   (Order No ah-M19900B) EUR 47,50 excl. VAT: € 39.92 / $ 47.10 black
 


Microphone stand M20000B, black

  • Cast-iron base and legs, with plastic-coating
  • Anti-vibration filters in legs
  • Telescopic height-adjustment from 900 to 1600 mm
  • Foldable legs
  • Weight: 2.7 kg

PDF data sheet Replacement list, technical drawing

price per piece   (Order No ah-M20000B) EUR 77,00 excl. VAT: € 64.71 / $ 76.35 black
 


Microphone stand M20120B,black

  • Folding, short-legged design with cast-iron base
  • Noiseless height-adjustment
  • Weight: 2.0 kg
  • H: 890/1590 mm
  • Black

PDF data sheet Replacement list, technical drawing

price per piece   (Order No ah-M20120B) EUR 44,50 excl. VAT: € 37.39 / $ 44.13 black
 


Special stand M20800B, black

  • Stable foldable base
  • Three-section telescopic height-adjustment from 1290 to 3000 mm
  • 3/8" thread top
  • Special clamps protect the finish
  • Weight: 4.5 kg

PDF data sheet Replacement list, technical drawing

price per piece   (Order No ah-M20800B) EUR 98,00 excl. VAT: € 82.35 / $ 97.18 black
 


Overhead microphone stand M20811B, black

  • Adjustable up to 3 m
  • This sturdy mic stand is designed for special stage and studio applications
  • Collapsible base
  • Solid steel construction
  • 2-piece extension tube with 3/8 thread
  • Height-adjustment with non-marring locking screws
  • Weight: 4.6 kg
  • H: 1290/3010 mm
  • Black

PDF data sheet Replacement list, technical drawing

price per piece   (Order No ah-M20811B) EUR 236,00 excl. VAT: € 198.32 / $ 234.02 black
 


Microphone stand M21020, nickel-plated

Enlarge
  • Worldwide proven standard model
  • Cast-iron base
  • Long leg construction
  • Foldable
  • Height-adjustable from 890 to 1600 mm
  • Boom arm 840 mm
  • Nickel-plated
  • Weight: 3.5 kg

PDF data sheet Replacement list, technical drawing

price per piece   (Order No ah-M21020) EUR 62,00 excl. VAT: € 52.10 / $ 61.48 nickel-plated
 


Microphone stand M21020B, black

Enlarge
  • Worldwide proven standard model
  • Cast-iron base
  • Long leg construction
  • Foldable
  • Height-adjustable from 890 to 1600 mm
  • Boom arm 840 mm
  • Black
  • Weight: 3.5 kg

PDF data sheet Replacement list, technical drawing

price per piece   (Order No ah-M21020B) EUR 57,90 excl. VAT: € 48.66 / $ 57.41 black
 


Overhead microphone stand M21021B, black

  • Extremely tall model with a longer boom arm length
  • Cast-iron base
  • Long leg construction
  • Foldable
  • Height-adjustable from 1100 to 2020 mm
  • Boom arm 1070 mm
  • Weight: 5.65 kg
  • Black

PDF data sheet Replacement list, technical drawing

price per piece   (Order No ah-M21021B) EUR 90,00 excl. VAT: € 75.63 / $ 89.24 black
 


Microphone stand M21060, nickel-plated

  • Modern update of the classic 21020, with boom arm
  • The compact zinc die-cast base and long legs provide excellent stability
  • Boom arm with 3/8" thread
  • Nickel-plated
  • Weight: 3 kg
  • Height: 92-163 cm
  • Boom arm length: 80 cm
  • Nickel plated

PDF data sheet Replacement list, technical drawing

price per piece   (Order No ah-M21060) EUR 53,00 excl. VAT: € 44.54 / $ 52.55 nickel-plated
 


Microphone stand M21060B, black

Enlarge
  • Modern update of the classic 21020, with boom arm
  • The compact zinc die-cast base and long legs provide excellent stability
  • Boom arm with 3/8" thread
  • Black
  • Weight: 3 kg
  • Height: 92-163 cm
  • Boom arm length: 80 cm
  • Black

PDF data sheet Replacement list, technical drawing

price per piece   (Order No ah-M21060B) EUR 53,00 excl. VAT: € 44.54 / $ 52.55 black
 


Metal microphone stand M21070B

Enlarge Low-priced all-metal-stand

Consists of tubing assembly, boom arm and zinc die-cast base with long folding legs. Square swivel joint with large wing nut.

Technical Data

  • Heigth: 1010/1720 mm
  • Arm boom length: 805 mm
  • Weigth: 3 kg

price per piece   (Order No ah-M21070B) EUR 46,50 excl. VAT: € 39.08 / $ 46.11
 


Microphone stand M21080, nickel-plated

  • Like model 210/6, but with extendable boom arm
  • Weigth: 3,0 kg
  • H: 925/1630 mm
  • BL: 425/725 mm
  • Weigth: 3 kg
  • Nickel-plated

PDF data sheet Replacement list, technical drawing

price per piece   (Order No ah-M21080) EUR 62,00 excl. VAT: € 52.10 / $ 61.48 nickel plated
 


Microphone stand M21080B, black

  • Like model 210/6, but with extendable boom arm
  • Weight: 3.0 kg
  • H: 925/1630 mm
  • BL: 425/725 mm
  • Black

PDF data sheet Replacement list, technical drawing

price per piece   (Order No ah-M21080B) EUR 62,00 excl. VAT: € 52.10 / $ 61.48 black
 


Microphone stand M21090, nickel-plated

Enlarge
  • A more compact version of the classic 210/2
  • The combination of the long-legged 201A/2 mic stand and the 211/1 telescopic boom arm
  • Like the 210/2, the 210/9 sets the standard for professional microphone boom stands
  • Weight: 3.2 kg
  • H: 900/1605 mm
  • BL: 460/770 mm
  • Nickel-plated

PDF data sheet Replacement list, technical drawing

price per piece   (Order No ah-M21090) EUR 68,00 excl. VAT: € 57.14 / $ 67.43 nickel-plated
 


Microphone stand M21090B, black

Enlarge
  • A more compact version of the classic 210/2
  • The combination of the long-legged 201A/2 mic stand and the 211/1 telescopic boom arm
  • Like the 210/2, the 210/9 sets the standard for professional microphone boom stands
  • Weight: 3.2 kg
  • H: 900/1605 mm
  • BL: 460/770 mm
  • Black

PDF data sheet Replacement list, technical drawing

price per piece   (Order No ah-M21090B) EUR 68,00 excl. VAT: € 57.14 / $ 67.43 black
 


Swivelarm M21100, nickel-plated

  • Boom arm length 840 mm
  • 3/8" thread
  • Locking washer
  • Plastic handgrip
  • Easy to tighten with locking T-bar handknob
  • Weight: 0.9 kg
  • Nickel-plated

PDF data sheet Replacement list, technical drawing

price per piece   (Order No ah-M21100) EUR 22,50 excl. VAT: € 18.91 / $ 22.31 nickel-plated
 


Boom arm M21110, nickel-plated

  • Classic 2-piece telescopic boom arm with 3/8 thread
  • Silent, scratchless swivel joint for adjustment of angle
  • Easy tightening with T-bar locking screw
  • Weight: 0.8 kg
  • BL: 470/770 mm
  • Nickel-plated

PDF data sheet Replacement list, technical drawing

price per piece   (Order No ah-M21110) EUR 27,00 excl. VAT: € 22.69 / $ 26.77 nickel-plated
 


Boom arm M21110B, black

  • Classic 2-piece telescopic boom arm with 3/8 thread
  • Silent, scratchless swivel joint for adjustment of angle
  • Easy tightening with T-bar locking screw
  • Weight: 0.8 kg
  • BL: 470/770 mm
  • Black

PDF data sheet Replacement list, technical drawing

price per piece   (Order No ah-M21110B) EUR 27,00 excl. VAT: € 22.69 / $ 26.77 black
 


Boom arm M21140B, black

  • Two-piece telescopic boom arm with 3/8 thread
  • Complete with locking washer and plastic grip
  • Smooth, silent and scratch-free adjustment thanks to large wing nut
  • Weight: 0.6 kg
  • BL: 425/725 mm

PDF data sheet Replacement list, technical drawing

price per piece   (Order No ah-M21140B) EUR 22,00 excl. VAT: € 18.49 / $ 21.82 black
 


Boom arm M21160B, black

  • Short one-piece boom arm with 3/8 thread
  • Locking washer and plastic grip
  • Smooth adjustment
  • Easy to tighten with wing nut
  • Weight: 0.5 kg
  • BL: 395 mm

price per piece   (Order No ah-M21160B) EUR 16,40 excl. VAT: € 13.78 / $ 16.26 black
 


Boom arm M21231B for overhead microphone stands, black

  • Telescopic boom arm with 3/8 thread
  • Adjustable counterweight
  • For use with model 20811 and 21411
  • Weight: 4.0 kg
  • BL: 1155/2060 mm

PDF data sheet Replacement list, technical drawing

price per piece   (Order No ah-M21231B) EUR 116,00 excl. VAT: € 97.48 / $ 115.03 black
 


K&M Overhead microphone stand M21411B, black

  • Extremely sturdy overhead mic stand for studio and broadcast applications
  • Extendible up to 2 m
  • Locking height-adjustment mechanism for added safety
  • 1/2 thread for use with 21231 boom arm
  • Collapsible design for easy transport and storage
  • Weight: 4.8 kg
  • H: 1480/2290 mm

PDF data sheet Replacement list, technical drawing

price per piece   (Order No ah-M21411B) EUR 114,00 excl. VAT: € 95.80 / $ 113.04 black
 


Table / floor stand M23400B, black

Enlarge
  • Combined table and floor stand with heavy cast base plate
  • Two-piece angle adjustable tubing
  • Best for: drums and studio or conference rooms
  • Arm boom, length: 400/640 mm
  • Weigth: 2,1 kg

price per piece   (Order No ah-M23400B) EUR 58,00 excl. VAT: € 48.74 / $ 57.51 black
 


Microphone swivel bar M24010B, black

Enlarge
  • Attaches to stands with a clamp locking assembly to 22 mm
  • Complete with boom arm, 550 mm
  • Weight: 1.0 kg
  • H: 300 mm

price per piece   (Order No ah-M24010B) EUR 34,00 excl. VAT: € 28.57 / $ 33.71 black
 


Microphone stand M25200B, black

  • Cast-iron base
  • Foldable legs
  • Three-section telescoping tube allows height-adjustment from 610 to 1550 mm
  • Non-scratching clutches to protect the finish
  • Boom arm adjustable from 460 to 765 mm
  • Weight: 3.2 kg
  • Black

PDF data sheet Replacement list, technical drawing

price per piece   (Order No ah-M25200B) EUR 76,00 excl. VAT: € 63.87 / $ 75.36 black
 


Microphone stand M25500B, black

  • Low-height 340 mm
  • Cast-iron base
  • Foldable legs
  • Extra long, telescopic boom arm adjustable from 850 to 1540 mm
  • Weight: 3.0 kg
  • Black

PDF data sheet Replacement list, technical drawing

price per piece   (Order No ah-M25500B) EUR 76,00 excl. VAT: € 63.87 / $ 75.36 black
 


Microphone stand M25600B, black

  • High-quality microphone stand with telescopic boom arm
  • Cast-iron base with folding legs
  • Unique design retains all screws and levers without tension
  • Patented clamping lever can be fixed in any position, for holding mic cable, etc.
  • Weight: 3.4 kg
  • H: 970/1640 mm
  • BL: 600/955 mm

PDF data sheet Replacement list, technical drawing

price per piece   (Order No ah-M25600B) EUR 95,00 excl. VAT: € 79.83 / $ 94.20 black
 


Table microphone clamp M25800B, black

  • Extendible steel tubing
  • Clamping mechanism allows tube to swivel full 360 degrees
  • Clamp adjustable to 63 mm
  • Weight: 0.8 kg
  • H: 560/1020 mm

PDF data sheet Replacement list, technical drawing

price per piece   (Order No ah-M25800B) EUR 48,50 excl. VAT: € 40.76 / $ 48.09 black
 


Microphone stand M25900B, black

  • Low-height
  • Adjustable from 450 to 1250 mm
  • Cast-iron base
  • Foldable legs
  • Complete with telescopic boom arm adjustable from 460 to 765 mm
  • Black

PDF data sheet Replacement list, technical drawing

price per piece   (Order No ah-M25900B) EUR 66,00 excl. VAT: € 55.46 / $ 65.45 black
 


Low microphone stand M25910B, black

  • Low-height
  • Adjustable from 450 to 1250 mm
  • Cast-iron base
  • Foldable legs
  • Complete with telescopic boom arm adjustable from 460 to 765 mm
  • Weight: 2.3 kg
  • Black

PDF data sheet Replacement list, technical drawing

price per piece   (Order No ah-M25910B) EUR 57,00 excl. VAT: € 47.90 / $ 56.52 black
 


Microphone stand M26000, nickel-plated

  • Heavy round cast-iron base
  • Anti-vibration rubber insert for noise filtration
  • Base diameter 250 mm
  • Height-adjustable by clutch from 870 to 1570 mm
  • Weight: 6.0 kg
  • Nickel-plated

PDF data sheet Replacement list, technical drawing

price per piece   (Order No ah-M26000) EUR 51,00 excl. VAT: € 42.86 / $ 50.57 nickel-plated
 


Microphone stand M26000B, black

  • Heavy round cast-iron base
  • Anti-vibration rubber insert for noise filtration
  • Base diameter 250 mm
  • Height-adjustable by clutch from 870 to 1570 mm
  • Weight: 6.0 kg
  • Black

PDF data sheet Replacement list, technical drawing

price per piece   (Order No ah-M26000B) EUR 51,00 excl. VAT: € 42.86 / $ 50.57 black
 


Microphone stand M26010, nickel-plated

Enlarge
  • Height adjustable
  • Round cast-iron base with sound-absorbing rubber insert
  • Extremely stable and steady
  • Weight: 3.5 kg
  • Height: 87-157 cm
  • Base diameter: 25 cm
  • Nickel-plated

PDF data sheet Replacement list, technical drawing

price per piece   (Order No ah-M26010) EUR 43,00 excl. VAT: € 36.13 / $ 42.64 nickel-plated
 


Microphone stand M26010B, black

Enlarge
  • Height adjustable
  • Round cast-iron base with sound-absorbing rubber insert
  • Extremely stable and steady
  • Weight: 3.5 kg
  • Height: 87-157 cm
  • Base diameter: 25 cm
  • Black

PDF data sheet Replacement list, technical drawing

price per piece   (Order No ah-M26010B) EUR 38,50 excl. VAT: € 32.35 / $ 38.18 black
 


König & Meyer Microphone stand M26085B, with one hand latching handle, black

Enlarge
  • Unique one hand latching mechanism handle with »Soft-Touch« coating
  • One button up and down movement
  • Steady and sturdy heavy round metal base
  • Extremely durable high-quality powder coating
  • Heigth: 1060/1790 mm
  • Weight: 3,2 kg

price per piece   (Order No ah-M26085B) EUR 63,00 excl. VAT: € 52.94 / $ 62.47 black
 


Microphone stand M27105B, black

Enlarge
  • Glass-fiber-reinforced plastic base
  • Foldable legs
  • Height-adjustable from 900 to 1600 mm
  • Non-scratching locking screw
  • Complete with boom arm 800 mm
  • Weight: 2.55 kg
  • Black

PDF data sheet Replacement list, technical drawing

price per piece   (Order No ah-M27105B) EUR 44,00 excl. VAT: € 36.97 / $ 43.63 black
 


Gooseneck table base M29390B, black

  • Black cast-iron base with a horizontally mounted XLR female socket on upper face
  • Removable plate, suitable for fitting switches, indicators, controls or connectors, with access to space for additional circuitry
  • Base is fitted with rear mounted 3-pole XLR male connector
  • Weight: 2.4 kg
  • Dimensions: 160 x 150 x 51 mm

PDF data sheet Replacement list, technical drawing

price per piece   (Order No ah-M29390B) EUR 99,00 excl. VAT: € 83.19 / $ 98.17 black
 


Gooseneck table base M29394B, with switch, black

  • Black cast-iron base with a horizontally mounted XLR female socket on upper face
  • Removable plate with mounted LED illuminated single pole changeover switch
  • Base is fitted with rear mounted 5 pole XLR male connector
  • Weight: 2.3 kg
  • Dimensions: 160 x 150 x 51 mm

PDF data sheet Replacement list, technical drawing

price per piece   (Order No ah-M29394B) EUR 102,00 excl. VAT: € 85.71 / $ 101.14 black
 


Microphone Stand with round base S22, black

Enlarge
  • Handy microphone stand with round base and plastic surround
  • Black powder coated
  • Heigth: 90 cm - 160 cm
  • Weigth: 4,51 kg

price per piece   (Order No ah-S22) EUR 27,00 excl. VAT: € 22.69 / $ 26.77 black
 


Adam Hall Microphone stand 94-160cm S5B, black

Enlarge
  • Microphone stand
  • With boom arm
  • Black
  • Heavy duty steel base with folding legs
  • Weight: 2,7kg
  • Height: 94-160 cm
  • Boom arm length: 79cm

price per piece   (Order No ah-S5B) EUR 24,00 excl. VAT: € 20.17 / $ 23.80 black
 


Microphone stand with boom S6B, black

Enlarge
  • Microphone stand black with telescopic boom arm
  • Heavy duty die cast base with folding legs
  • Weight 2,5 kg
  • Height 94-160 cm
  • Telescopic boom arm, length: 50 - 80 cm

price per piece   (Order No ah-S6B) EUR 26,00 excl. VAT: € 21.85 / $ 25.78 black
 


Small microphone stand S7B, with round base, black

Enlarge
  • Small microphone stand black with massive round cast base
  • For guitar, amp, drum, brass a.s.o.
  • Height 40 cm
  • Telescopic boom arm, length: 48 - 80 cm
  • Weight: 4,0 kg

price per piece   (Order No ah-S7B) EUR 24,00 excl. VAT: € 20.17 / $ 23.80 black
 


Table microphone stand S8B, black

Enlarge
  • Table microphone stand
  • With 5/8" thread adapter
  • With microphone holder
  • Blister pack
  • Height:11-17.5 cm
  • Length: 20 x 20 x 20 cm spread

price per piece   (Order No ah-S8B) EUR 10,90 excl. VAT: € 9.16 / $ 10.81 black
 


Small microphone stand S9B, with boom, black

Enlarge
  • Small microstand black
  • For guitar, amp, drum, brass a.s.o.
  • Material: metal
  • Height: 50 - 70 cm
  • Telescopic boom arm, length: 50 - 80 cm
  • Weight: 2,0 kg

price per piece   (Order No ah-S9B) EUR 24,00 excl. VAT: € 20.17 / $ 23.80 black
 


Adam Hall Transport bag SMICBAG, for 2 microphone stands, black

Enlarge
  • Transport bag for microphone stands
  • Dimensions (Length x Diameter): 105 cm x 12 cm
  • Water-repellent
  • Convenient for 2 microphone stands (i.e. S5B or S6B)

price per piece   (Order No ah-SMICBAG) EUR 10,90 excl. VAT: € 9.16 / $ 10.81 black